Hypex UcD® Amplifier modules


UcD® Amplifier module UcD180HG with HxR

Enlarge What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.

Features

  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise
  • Consistent top performer in listening trials
  • Runs on unregulated +/- rails
  • Pop-free start and stop control
  • Differential audio input
  • Overcurrent and overvoltage protection
  • HxR regulator mounted

Applications

  • Monitor loudspeakers for recording and mastering studios
  • Audiophile power amplifiers for professional and consumer use
  • Public Address systems
  • Home theatre systems
  • Active loudspeakers

Electrical data

  • Power supply voltage: +/- 30-50V
  • Unit shuts down when either rail exceeds 52V
  • Unit shuts down when either rail drops below 25V
  • Power rating: 180Wrms @ 4ohm

Key mechanical data

  • Weight: 200g
  • Dimentions: 65mm x 65mm x 30mm
  • Mounting set included

Datasheet

Manual

Datasheet HxR

Price per unit   (Order No hy-UCD-180HG-HXR) EUR 105,90 excl. VAT: € 88.99 / $ 96.11
 


UcD® Amplifier module UcD400HG

Enlarge What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.

Features

  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise
  • Consistent top performer in listening trials
  • Runs on unregulated +/- rails
  • Pop-free start and stop control
  • Differential audio input
  • Overcurrent and overvoltage protection
  • HxR regulator ready

Applications

  • Monitor loudspeakers for recording and mastering studios
  • Audiophile power amplifiers for professional and consumer use
  • Public Address systems
  • Home theatre systems
  • Active loudspeakers

Also available with pre-mounted HxR regulators

Electrical data

  • Power supply voltage: +/- 45-65V
  • Unit shuts down when either rail exceeds 68V
  • Unit shuts down when either rail drops below 30V
  • Power rating: 400Wrms @ 4ohm

Key mechanical data

  • Weight: 250g
  • Dimentions: 75mm x 82mm x 30mm
  • Mounting set included

Datasheet

Manual

Price per unit   (Order No hy-UCD-400HG) - not available
 


UcD® Amplifier module UcD400HG with HxR

Enlarge What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.

Features

  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise
  • Consistent top performer in listening trials
  • Runs on unregulated +/- rails
  • Pop-free start and stop control
  • Differential audio input
  • Overcurrent and overvoltage protection
  • HxR regulator mounted

Applications

  • Monitor loudspeakers for recording and mastering studios
  • Audiophile power amplifiers for professional and consumer use
  • Public Address systems
  • Home theatre systems
  • Active loudspeakers

Electrical data

  • Power supply voltage: +/- 45-65V
  • Unit shuts down when either rail exceeds 68V
  • Unit shuts down when either rail drops below 30V
  • Power rating: 400Wrms @ 4ohm

Key mechanical data

  • Weight: 250g
  • Dimentions: 75mm x 82mm x 30mm
  • Mounting set included

Datasheet

Manual

Datasheet HxR

Price per unit   (Order No hy-UCD-400HG-HXR) EUR 130,90 excl. VAT: € 110.00 / $ 118.80
 


UcD® Amplifier module UcD700HG

Enlarge What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.

Features

  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise
  • Consistent top performer in listening trials
  • Runs on unregulated +/- rails
  • Pop-free start and stop control
  • Differential audio input
  • Overcurrent and overvoltage protection
  • HxR regulator ready

Applications

  • Monitor loudspeakers for recording and mastering studios
  • Audiophile power amplifiers for professional and consumer use
  • Public Address systems
  • Home theatre systems
  • Active loudspeakers

Also available with pre-mounted HxR regulators

Electrical data

  • Power supply voltage: +/- 75-95V
  • Driver supply voltage: +12-15V
  • Unit shuts down when either rail exceeds 96V
  • Output current limits at 28A
  • Output power: 700Wrms @ 4Ohm

Key mechanical data

  • Weight: 280g
  • Dimentions: 130mm x 80mm x 40mm
  • Mounting set included

Datasheet

Price per unit   (Order No hy-UCD-700HG) - not available
 


UcD® Amplifier module UcD700HG with HxR

Enlarge What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.

Features

  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise
  • Consistent top performer in listening trials
  • Runs on unregulated +/- rails
  • Pop-free start and stop control
  • Differential audio input
  • Overcurrent and overvoltage protection
  • HxR regulator ready

Applications

  • Monitor loudspeakers for recording and mastering studios
  • Audiophile power amplifiers for professional and consumer use
  • Public Address systems
  • Home theatre systems
  • Active loudspeakers

Also available with pre-mounted HxR regulators

Electrical data

  • Power supply voltage: +/- 75-95V
  • Driver supply voltage: +12-15V
  • Unit shuts down when either rail exceeds 96V
  • Output current limits at 28A
  • Output power: 700Wrms @ 4Ohm

Key mechanical data

  • Weight: 280g
  • Dimentions: 130mm x 80mm x 40mm
  • Mounting set included

Datasheet

Datasheet HxR

Price per unit   (Order No hy-UCD-700HG-HXR) - not available
 


UcD® Amplifier module UcD2kwith HxR

Enlarge UcD module 2000Wrms, 3200W peak.

Highlights

  • Flat, fully load-independent frequency responce
  • Low output inpedance
  • Very low, frequency-independent THD
  • Very low noice
  • Fully passive loop control

Features

  • Runs on unregulated +/- rails
  • Differential audio input
  • On-board clipping detection
  • DC-fault detection
  • Overcurrent and overvoltage protection

Applications

  • Public Address systems
  • Active loudspeakers

Electrical data

  • Power supply voltage: +/- 50-100V
  • Driver supply voltage: +12-15V
  • Unit shuts down when either rail exceeds 98V
  • Output current limits at 50A
  • Output power: 2500Wrms @ 4Ohm
  • Output power: 2000Wrms @ 2Ohm

Key mechanical data

  • Weight: 500g
  • Dimensions: 141mm x 110mm x 36mm
  • Mounting set included

Datasheet

Price per unit   (Order No hy-UCD-2k) - not available
 


UcD® Amplifier module UcD34MP

Enlarge The UcD34MP is a high efficiency Safety Class 2 four channel mains powered UcD module. The UcD32MP integrates a low power (Max. 10W) standby SMPS, the main power supply is triggered for normal operation or latched off in case of a critical fault via in built-in actuators.

Features

  • Advanced over current protection
  • Remote controlled operation
  • High efficiency
  • Universal input voltage range
  • Extremely small form factor
  • Low EMI
  • 10W standby SMPS

Applications

  • Stereo or multichannel audio systems based on our UcD32 module
  • Active loudspeaker

Electrical data

  • High line Input Voltage: 180 - 264 Vac
  • Low line Input Voltage: 90 - 132 Vac
  • Power rating: 30Wrms @ 4ohm per channel
  • Total Power rating: 100Wrms
  • Total Power rating : 70Wrms @20Hz

Key mechanical data

  • Weight: 200g
  • Dimensions: 165mm x 70mm x 31,6mm

Datasheet

Price per unit   (Order No hy-ucd34mp) - not available
 


UcD® Amplifier module UcD36MP

Enlarge The UcD36MP is a high efficiency Safety Class 2 six channel mains powered UcD module. The UcD32MP integrates a low power (Max. 10W) standby SMPS, the main power supply is triggered for normal operation or latched off in case of a critical fault via in built-in actuators.

Features

  • Advanced over current protection
  • Remote controlled operation
  • High efficiency
  • Universal input voltage range
  • Extremely small form factor
  • Low EMI
  • 10W standby SMPS

Applications

  • Stereo or multichannel audio systems based on our UcD32 module
  • Active loudspeaker

Electrical data

  • High line Input Voltage: 180 - 264 Vac
  • Low line Input Voltage: 90 - 132 Vac
  • Power rating: 30Wrms @ 4ohm per channel
  • Total Power rating: 100Wrms
  • Total Power rating : 70Wrms @20Hz

Key mechanical data

  • Weight: 200g
  • Dimensions: 187mm x 70mm x 31,6mm

Datasheet

Price per unit   (Order No hy-ucd36mp) - not available