Coaxial speaker Full Range Woofer no longer sold

Mission

Mission Electronics was founded in 1977 by Farad Azima. It was recognised as one of the leaders in the development of acoustic engineering.

To our building proposals with Mission drivers.

Coaxial speaker

recommended cabinet 1:
closed cabinet with 3,1 L volume
from 110/69 Hz (-3dB/-8dB)

recommended cabinet 2:
12,5 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 49/43 Hz (-3dB/-8dB).

Mission CP-10X

order no. bb-cp10x

EUR 26,10 excl. VAT: € 21.93 / $ 23.69

10 cm coax driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton.

frequency range = 70-20000 Hz
resonance frequency fs = 76 Hz
impedance R = 12 Ohm
sound pressure level SPL = 86 dB (2,83V; 1m)
DC resistance Re = 9,7 Ohm
force factor BL = 5,8 N/A
effective piston radiating area Sd = 61 cm²
effective mechanical mass incl. air load mms = g
equivalent volume of compliance Vas = 4,07 l
total Q factor Qts = 0,56 (Qms=3,45, Qes=0,662)
voice coil diameter = 25 mm
mounting diameter d = 98 mm
overall diameter d = 105 mm
mounting depth (not countersunk) t = 56 mm

show kits to this chassis hide kits

Full Range

recommended cabinet 1:
closed cabinet with 3 L volume
from 108/68 Hz (-3dB/-8dB)

recommended cabinet 2:
11,9 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 48/42 Hz (-3dB/-8dB).

Mission CP-101

order no. bb-cp101

- not available

10 cm midrange driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton. The driver is magnetically shielded.

frequency range = 80-14000 Hz
resonance frequency fs = 77 Hz
impedance R = 12 Ohm
sound pressure level SPL = 86 dB (2,83V; 1m)
DC resistance Re = 9,6 Ohm
force factor BL = 6,51 N/A
effective piston radiating area Sd = 61 cm²
effective mechanical mass incl. air load mms = 6,37 g
equivalent volume of compliance Vas = 3,44 l
total Q factor Qts = 0,58 (Qms=3,37, Qes=0,7)
voice coil diameter = 25 mm
mounting diameter d = 96 mm
overall diameter d = 105 mm
mounting depth (not countersunk) t = 72 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 130/82 Hz (-3dB/-8dB)

recommended cabinet 2:
3,7 L volume bass reflex cabinet
with HP35 reflex tube, 14 cm long.
from 68/53 Hz (-3dB/-8dB).

Mission CP-104

order no. bb-cp104

- not available

10 cm midrange driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton.

frequency range = 80-10000 Hz
resonance frequency fs = 57 Hz
impedance R = 4 Ohm
sound pressure level SPL = 86 dB (2,83V; 1m)
DC resistance Re = 3,3 Ohm
force factor BL = 4,7 N/A
effective piston radiating area Sd = 61 cm²
effective mechanical mass incl. air load mms = 7,33 g
equivalent volume of compliance Vas = 5,51 l
total Q factor Qts = 0,34 (Qms=2,8, Qes=0,39)
voice coil diameter = 25 mm
mounting diameter d = 97 mm
overall diameter d = 105 mm
mounting depth (not countersunk) t = 66 mm

show kits to this chassis hide kits

Woofer

recommended cabinet 1:
closed cabinet with 7,3 L volume
from 88/56 Hz (-3dB/-8dB)

recommended cabinet 2:
27 L volume bass reflex cabinet
with HP70 reflex tube, 14 cm long.
from 44/35 Hz (-3dB/-8dB).

Mission CP-168

order no. bb-cp168

- not available

16 cm bass driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton.

frequency range = 30-3000 Hz
resonance frequency fs = 43,91 Hz
impedance R = 8 Ohm
sound pressure level SPL = 89 dB (2,83V; 1m)
DC resistance Re = 7,5 Ohm
force factor BL = 8,24 N/A
effective piston radiating area Sd = 141 cm²
effective mechanical mass incl. air load mms = 13,65 g
equivalent volume of compliance Vas = 26,7 l
total Q factor Qts = 0,4 (Qms=7,17, Qes=0,42)
voice coil diameter = 25 mm
maximum peak linear excursion vibration x_lin = +/- 3 mm
mounting diameter d = 146 mm
overall diameter d = 156 mm
mounting depth (not countersunk) t = 94 mm

show kits to this chassis hide kits

no longer sold

recommended cabinet 1:
closed cabinet with 1,6 L volume
from 130/82 Hz (-3dB/-8dB)

recommended cabinet 2:
5,1 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 69/54 Hz (-3dB/-8dB).

Mission CP-134

order no. bb-cp134

- not available

13 cm midrange driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton.

frequency range = 50-10000 Hz
resonance frequency fs = 53,8 Hz
impedance R = 4 Ohm
sound pressure level SPL = 88 dB (2,83V; 1m)
DC resistance Re = 3,3 Ohm
force factor BL = 5,44 N/A
effective piston radiating area Sd = 82 cm²
effective mechanical mass incl. air load mms = 8,83 g
equivalent volume of compliance Vas = 9,24 l
total Q factor Qts = 0,31 (Qms=6,34, Qes=0,33)
voice coil diameter = 25 mm
mounting diameter d = 111 mm
overall diameter d = 126 mm
mounting depth (not countersunk) t = 72 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,4 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
14,2 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 56/43 Hz (-3dB/-8dB).

Mission CP-164

order no. bb-cp164

- not available

16 cm bass driver with paper cone. The voice coil is ventilated. The voice coil is made of kapton.

frequency range = 30-3000 Hz
resonance frequency fs = 43 Hz
impedance R = 4 Ohm
sound pressure level SPL = 90 dB (2,83V; 1m)
DC resistance Re = 3,4 Ohm
force factor BL = 6,35 N/A
effective piston radiating area Sd = 142 cm²
effective mechanical mass incl. air load mms = 14,65 g
equivalent volume of compliance Vas = 25,8 l
total Q factor Qts = 0,31 (Qms=6,74, Qes=0,33)
voice coil diameter = 25 mm
mounting diameter d = 146 mm
overall diameter d = 156 mm
mounting depth (not countersunk) t = 94 mm

show kits to this chassis hide kits

Coaxial speaker Full Range Woofer no longer sold

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.