Emotion 2017   Floorstanding as in K+T 4/2017

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): 85 dB
  • size (HxWxD): 914 x 218 x 345 mm
  • frequency range (-8dB): 35 - 23000 Hz
  • crossover frequency(s): Hz
  • speaker type: bass reflex

Omnes Audio Emotion 2017 is a two way floorstanding speaker.

Omnes Audio Emotion 2017 is a transmission-line loudspeaker with drivers of Omnes Audio and Tang Band.

The kit is delivered with the following drivers:
- a Omnes Audio AMT 60 air motion transformer (ribbon-tweeter)
- a Tang Band W6-623 midrange / bass driver

The loudspeaker has been developed by Thorsten Fischer.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 3rd order low-pass filter (18 dB per octave slope) for the mids-woofer.

An excerpt from the Klang+Ton review

Our kit consists of

  • Tang Band W6-623C 6 inch paper mids/woofer
  • Omnes Audio AMT 60.1 (round)
  • Bass reflex tube HP70, 68x160 mm, black
  • Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • Damping Sonofil 100 x 35 cm for 20 litres
  • 0,5x Foam N25, 100x50x4 cm, black
  • Terminal T105 Au, with brass, gold plated
  • 3m Speaker cable 2x1.5 mm2, transparent
  • 0,5x Pan screws 3.5x17 black, cross recess, 8 pieces
  • Pan screws 4x20 black, cross recess, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 5.6 uF / 400 Vdc
  • Audaphon MKP CAP Superior 12 uF / 400 Vdc
  • Audaphon MKT CAP 6.8 uF / 160 Vdc
  • 1.0 mm air core coil, 0.10 mH/0.14 Ohm
  • 1.3 mm air core coil, 1.8 mH/0.45 Ohm
  • 0.7 mm air core coil, 0.15 mH/0.28 Ohm
  • Metal-oxide resistor, 10W 12 Ohm (brown-red-black)

Kit without cabinet, price per speaker with round AMT   EUR 208,00 excl. VAT: € 174.79 / $ 202.76

Kit without cabinet, price per speaker with rectangulaire AMT   EUR 208,00 excl. VAT: € 174.79 / $ 202.76

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the fullrange driver are of type polypropylen (MKP) Clarity-Cap CSA and Audaphon.

Kit without cabinet with high-end-crossover, price per speaker with round AMT   EUR 261,00 excl. VAT: € 219.33 / $ 254.42

Kit without cabinet with high-end-crossover, price per speaker with rectangulaire AMT   EUR 261,00 excl. VAT: € 219.33 / $ 254.42

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 14,95 excl. VAT: € 12.56 / $ 14.57

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit:   EUR 5,10 excl. VAT: € 4.29 / $ 4.97
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview