Technical data
- impedance: 8 Ohm
- sensivity (2,83V/1m): 88 dB
- size (HxWxD): 845 x 182 x 405 mm
- frequency range (-8dB): 50 - 20000 Hz
- crossover frequency(s): Hz
- speaker type: Horn
|
BK103 is a backloaded horn. It is a design of Fostex, Japan. To flatten the frequency response of the speaker Bernd Timmermanns added a crossover.
The fullrange speaker Fostex FE103 En is used in the floorstander.
The crossover contains two wave traps in series to the speaker.
|
Our kit consists of
- Fostex FE 103En, full range speaker
- 0,25x Audaphon Damping 10, 970 x 470 mm, adhesive
- Binding Post PK31, gold plated (one pair, red and black)
- 2m Speaker cable 2x2.5 mm2, transparent
- Pan screws 4x20 black, cross recess, 4 pieces
- Plan for DIY kit
the crossover components (right),
to be mounted on a piece of wood
|
- electrolytic capacitor, unetched, 10 μF / 70 Vdc
- electrolytic capacitor, unetched, 33uF / 70 Vdc
- 1.4 mm air core coil, 0.22 mH/0.12 Ohm
- 1.4 mm air core coil, 0.56 mH/0.20 Ohm
- Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)
- Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
|
Kit without cabinet, price per speaker
- not available
Kit with high-end crossover
The kit with high-end crossover contains Mundorf baked varnish air core coils. As capacitor only ClarityCap, Series PWA capacitiors are used.
- ClarityCap PWA capacitor 10 μF / 250 Vdc
- ClarityCap PWA capacitor 33 μF / 250 Vdc
- Mundorf baked varnish air core coil BL140, 0.22 mH/0.12 Ohm
- Mundorf baked varnish air core coil BL140, 0.56 mH/0.20 Ohm
- Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)
- Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
|
Kit with high-end-crossover without cabinet, price per speaker
- not available
Impedance correction
|
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
- Audaphon MKT CAP 10 μF / 160 Vdc
- Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
Price per impedance correction for one speaker, to be mounted on a small wooden board.
EUR 4,80 excl. VAT: € 4.03 / $ 4.36
universal PCB
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:
EUR 5,90 excl. VAT: € 4.96 / $ 5.35
We recommend one board per kit (two boards for a speaker pair)
|