WVL One   Shelf speaker as in K+T 6/2020

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 91 dB
  • size (HxWxD): 710 x 410 x 300 mm
  • frequency range (-8dB): 50 - 35000 Hz
  • crossover frequency(s): 2000 Hz
  • speaker type: passive radiator
Enlarge

WVL One is a two way compact speaker.

WVL One is available

WVL One is a loudspeaker with drivers of Wolf von Langa . Passive radiators provide deep bass.

The kit is delivered with the following drivers:
- a Wolf von Langa Beryllium (Made by Scan Speak) tweeter
- a Wolf von Langa AX-2676Be woofer

The loudspeaker has been developed by Dennis Frank, Daniel Gattig and Wolf von Langa.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 3rd order low-pass filter (18 dB per octave slope) for the woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is nearly perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,5% above 600 Hz and doesn't exceed 0,9% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • WVL Power Management (piece) for two WVL Superior Field Coil Loudspeakers
  • 2x WVL AX-2676Be (piece) 40cm square frame, 2.25ADC
  • 2x WVL passive radiator light
  • 4x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • 2x Binding Post PK28 I, gold plated (one pair, red and black)
  • 4m Speaker cable 2x1.5 mm2 black/red
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • 4x Mundorf MCAP EVO Oil 10 μF; / 450 V
  • 2x Mundorf MCAP EVO Silver Gold Öl 8.2 μF; / 450 V
  • 2x Mundorf MCAP EVO Silver Gold Öl 15 μF; / 450 V
  • 2x Mundorf copper foil coil CFC16-0.22mH/0.13Ohm
  • 2x Mundorf copper foil coil CFC14-1.8mH/0.32Ohm
  • 2x Mundorf baked varnish air core coil BL71, 4.7 mH/2.19 Ohm
  • 2x Mundorf cfn14 zero Ohm coil 3.3mH/0.15Ohm
  • 2x MResist Supreme 22 Ohm / 20 Watt

Kit without cabinet, price per pair   EUR 18942,00 excl. VAT: € 15917.65 / $ 17191.06

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:   EUR 4,70 excl. VAT: € 3.95 / $ 4.27
We recommend one board per kit (2 boards per speaker pair)

Measurements

measurmentsMeasurements on this speaker

Home   Klang+Ton Overview