D'Accord   Floorstanding as in K+T 2/2014

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): 90 dB
  • size (HxWxD): 1100 x 544 x 180 mm
  • frequency range (-8dB): 32 - 27000 Hz
  • crossover frequency(s): Hz
  • speaker type: bass reflex

D'Accord is a floorstanding with full range driver Davis 20 DE 8.

The crossover is designed to reduce the level between 300 Hz and 15 000 Hz.

Our kit consists of

  • Davis 20 DE 8, Alnico Fullrange Driver
  • Bass reflex tube BR70, 70x185 mm, black
  • PE sealing tape, 5x2 mm, 7.5 m
  • 2x Damping Sonofil 100 x 35 cm for 20 litres
  • 5x Bitumex board 32.5 x 24.5 cm, 6 mm
  • 0,5x Foam N25, 100x50x4 cm, black
  • Binding Post PK31, gold plated (one pair, red and black)
  • 2m Speaker cable 2x1.5 mm2, transparent
  • Allen wood screws IS 4x16mm, black (MZF-8614) , 8 pcs
  • Plan for DIY kit

 the crossover components,
to be mounted on a small wooden board.

  • ClarityCap ESA capacitor
  • Mundorf baked varnish air core coil BL140
  • Metal-oxide resistor, 10W

Kit without cabinet, price per speaker   - not available

Kit with high-end crossover

Kit without cabinet, price per speaker   - not available

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 14,40 excl. VAT: € 12.10 / $ 14.16

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:   EUR 5,90 excl. VAT: € 4.96 / $ 5.80
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview