Technical data
- impedance: 6 Ohm
- sensivity (2,83V/1m): 87 dB
- size (HxWxD): 382 x 282 x 182 mm
- frequency range (-8dB): 50 - 20000 Hz
- crossover frequency(s): 2050 Hz
- speaker type: closed box
|
Looking for a cheap Kit (cheap trick) Thomas Schmidt encountered Visaton chassis. Thomas Schmidt chose Visaton woofer W170S4 and the Visaton dome tweeter SC10N. These are used in a closed, easy-to-install housing.
A second-order crossover is used (slope 12 dB/octave).
|
|
Our kit consists of
- Visaton tweeter SC10N
- Visaton woofer W170 S4
- PE sealing tape, 5x2 mm
- 0,5x Damping Sonofil 100 x 35 cm for 20 litres
- Terminal T105 Au, with brass, gold plated
- 1,5m Speaker cable 2x1.5 mm2, transparent
- Pan screws 3.5x17 black, 8 pieces
- Countersunk screws 3.5x25, 8 pcs
- Plan for DIY kit
the crossover components (right),
to be mounted on a small wooden board.
|
- Audaphon MKP CAP Superior 5.6 μF / 400 Vdc
- Audaphon MKT CAP 22 μF / 160 Vdc
- 0.7 mm air core coil, 0.56 mH/0.55 Ohm
- 1.4 mm air core coil, 1.2 mH/0.33 Ohm
- Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
- Metal-oxide resistor, 10W 12 Ohm (brown-red-black)
|
Kit without cabinet, price per speaker
EUR 139,00  excl. VAT: € 116.81 / $ 120.31
Kit with high-end crossover
In the kit with high end crossover ClarityCap capacitors are used. All coils are designed as baked varnish air core coils to suppress vibrations in the coil.
- ClarityCap SA capacitor 5.6 μF / 630 Vdc
- ClarityCap PWA capacitor 22 μF / 160 Vdc
- Mundorf baked varnish air core coil BL71, 0.56 mH/0.64 Ohm
- Mundorf baked varnish air core coil BL140, 1.2 mH/0.34 Ohm
- Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
- Metal-oxide resistor, 10W 12 Ohm (brown-red-black)
Kit without cabinet, price per speaker
 on request
Impedance correction
|
|
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
- electrolytic capacitor, unetched, 47uF / 50 Vdc
- 0.7 mm air core coil, 0.15 mH/0.32 Ohm
- Metal-oxide resistor, 10W 5.6 Ohm (green-blue-gold)
Price per impedance correction for one speaker, to be mounted on a small wooden board.
EUR 12,80 excl. VAT: € 10.76 / $ 11.08
universal PCB
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:
EUR 5,90 excl. VAT: € 4.96 / $ 5.11
We recommend one board per kit (two boards for a speaker pair)
|