Microphone accessories

3-way microphone combiner MC-31

3-way microphone combiner, (3 inputs/1 output), for connecting 3 microphones to e.g. one microphone input of a mixer.
 
  • Balanced XLR connections (200 Ω)
  • Frequency range: 20-20,000 Hz
  • Also suitable for microphones with phantom power
  • Robust metal housing with very good shielding qualities, suitable for stage applications
  • Dimensions: 125x55x75 mm
  • Weight: 570 g

 
SOUNDCHECK 07/2007 on the FGA-102, FGA-202, LC-31, MC-31 and LSP-102:
 
"Every musician or sound engineer should have these little helpers in their toolbox. They impress by their unobtrusiveness. Both the robust metal housing and the functionality of these transformers allow to solve many problems on stage or in the studio at a reasonable price."

 

Price per unit   (Order No. mo-251690) EUR 42,00 excl. VAT: € 35.29 / $ 37.76


2-channel low-noise microphone preamplifier MPA-202

2-channel low-noise microphone preamplifier
 
  • 2 microphone inputs, XLR, bal.
  • Gain control, 11 steps, 20-70 dB
  • 2 level controls ±5 dB
  • LED green/red for indicating operation/peak
  • Phantom power +12 V, can be switched on additionally
  • Microphone phase can be switched for each channel
  • Lo cut 15-240 Hz, continuously adjustable
  • Subsonic filter 15 Hz, 18 dB/oct.
  • 2 line outputs, XLR bal.
  • 2 line outputs, RCA unbal.
Specifications:
  • Frequency range: 20-20,000 Hz
  • Input sensitivity: 0.16-150 mV, switchable
  • Input impedance:
  • Mic: 4.4 kΩ bal., 2.2 kΩ unbal.
  • Stereo line: -
  • Outputs:
  • Line, bal.: 1 V/100 Ω, 14 V max.
  • Stereo line: 1 V/600 Ω, 7 V max.
  • Stereo master: -
  • Filter, low cut: 15-240 Hz, 6 dB/oct.
  • Filter, high cut: -
  • Filter, subsonic: 15 Hz, 18 dB/oct.
  • Gain, mic: 15-75 dB
  • Gain, stereo line: -
  • S/N ratio, mic:>68 dB (unweighted)>87 dB (weighted)
  • S/N ratio, line: -
  • THD:<0.01 %
  • Power supply: via supplied plug-in PSU
  • Dimensions: 116x55x135 mm

Price per unit   (Order No. mo-320710) EUR 247,30 excl. VAT: € 207.82 / $ 222.36


Nylon bag for microphones MT-40

Nylon bag for microphones, with soft inner lining and solid zip fastener. For storing and transporting wireless hand-held microphones or standard microphones with connection cable. Dimensions: 30x16 cm.

 

Price per unit   (Order No. mo-233870) EUR 12,19 excl. VAT: € 10.24 / $ 10.96


Microphone splitter MPS-1

Microphone splitter, for distributing one input signal to two outputs, e.g. monitor mixer and main mixer.
 
  • Galvanically isolated output with ground lift switch and feed-through output
  • XLR connections (600 Ω) for input and output
  • Frequency range: 35-30,000 Hz
  • Dimensions: 100x80x40 mm
  • Weight: 310 g

 

Price per unit   (Order No. mo-243790) EUR 31,81 excl. VAT: € 26.73 / $ 28.60


Connection cable 801CS

Connection cable, with screwable 3.5 mm plug, suitable for CM-804IF, CM-204ULF and CM-801F.

 

Price per unit   (Order No. mo-236110) EUR 15,61 excl. VAT: € 13.12 / $ 14.04


Microphone holder CLP-6

Microphone holder
 
This robust clamp allows a secure attachment of the microphone NX-6 to the rims of e.g. toms or snare drums. Thus, precise and optimum positioning of the microphones is possible. The microphone can be screwed directly to the clamp.

 

Price per unit   (Order No. mo-235060) EUR 31,26 excl. VAT: € 26.27 / $ 28.11


Replacement microphone head CP-40

Replacement microphone head, suitable for PDM-3 as well as microphones of the same design.

 

Price per unit   (Order No. mo-235250) EUR 13,01 excl. VAT: € 10.93 / $ 11.70


Desktop microphone base DMS-1

Desktop microphone base, for gooseneck microphones.
 
  • On/off switch
  • Non-slip diecast housing
  • Microphone connection via XLR jack with latching device
  • XLR output, balanced connection
  • Dimensions: 135x55x145 mm
  • Weight: 1.3 kg

 

Price per unit   (Order No. mo-233490) EUR 73,03 excl. VAT: € 61.37 / $ 65.67


Phantom power supply adapter EMA-1

Phantom power supply adapter
 
  • For elelctret microphones and electret microphone cartridges
  • Also as a phantom power adapter for mixers with phantom power supply +48 V DC current
  • Internal power supply via 1.5 V battery AA size (not supplied)
  • Mini XLR input
  • XLR output
Specifications:
  • Frequency range:
  • Input impedance:
  • Phantom power: via mixer 48 V DC current
  • Power supply: 1.5 V batt. AA size
  • Admiss. ambient temp.: 0-40 °C
  • Dimensions: Ø 22 mm x 170 mm
  • Weight: 75 g

Price per unit   (Order No. mo-232120) EUR 47,14 excl. VAT: € 39.61 / $ 42.39


48 V phantom power supply EMA-200

48 V phantom power supply
 
  • For 2 electret microphones or microphone cartridges
  • Power supply: 230 V /50 Hz/10 VA
  • 2 x XLR input (bal.)
  • 2 x XLR output (bal.)
Specifications:
  • Frequency range: 20-20,000 Hz
  • Input impedance:
  • Phantom power: +48 V DC current
  • Power supply: 230 V /50 Hz/10 VA
  • Admiss. ambient temp.: 0-40 °C
  • Dimensions: 180x50x145 mm
  • Weight: 1.2 kg

Price per unit   (Order No. mo-232790) EUR 147,20 excl. VAT: € 123.70 / $ 132.36


48 V phantom power supply EMA-3

48 V phantom power supply
 
  • For electret microphones and microphone cartridges
  • XLR input (bal.)
  • XLR output (bal.)
Specifications:
  • Frequency range: 20-20,000 Hz
  • Input impedance: -
  • Phantom power: +48 V DC current
  • Power supply: via suppl. plug-in PSU
  • Admiss. ambient temp.: 0-40 °C
  • Dimensions: 126x75x45 mm
  • Weight: 535 g

Price per unit   (Order No. mo-233820) EUR 77,24 excl. VAT: € 64.91 / $ 69.45


Phantom power supply adapter EMA-300P

Phantom power supply adapter
 
  • For connecting ECM-300B, ECM-300L and other microphones with 3-pole mini XLR connector to a mixer with 48 V phantom power
  • Mini XLR plug and XLR plug, 3 poles
Specifications:
  • Frequency range:
  • Input impedance:
  • Phantom power: via mixer
  • Power supply: -
  • Admiss. ambient temp.: 0-40 °C
  • Dimensions: Ø 19 mm x 92 mm
  • Weight: 80 g

Price per unit   (Order No. mo-232410) EUR 47,14 excl. VAT: € 39.61 / $ 42.39


Gooseneck GN-500

Gooseneck, 500 mm (20").
 
  • Chromium-plated
  • Inside thread: 16 mm ( 5/8 ")
  • Outside thread: 9 mm ( 3/8 ")
  • Incl. adapter, inside thread: 9 mm ( 3/8 "), outside thread: 16 mm ( 5/8 ")

 

Price per unit   (Order No. mo-233120) EUR 16,82 excl. VAT: € 14.13 / $ 15.12


Gooseneck mounting plate GNS-2

Gooseneck mounting plate, with 16 mm ( 5/8 ") thread for accepting microphone goosenecks, e.g. GN-500 or GN-300, Ø 60 mm x 20 mm.

 

Price per unit   (Order No. mo-233620) EUR 5,18 excl. VAT: € 4.35 / $ 4.66


Adjustable attenuator for balanced microphones MA-123

Adjustable attenuator for balanced microphones
 
PA applications and sound pick-ups where high microphone output levels are to be expected, sometimes need a smooth touch in order to prevent an overload of the input stage of the following unit. The user is doomed if the mixer or preamplifier does not feature any level adjustment at all for the incoming microphone signal. The MA-123 is the answer to these problems. It is simply connected between microphone and signal input stage. The attenuation can be selected in 3 steps: 10 dB, 20 dB and 30 dB. Also suitable for balanced condenser/electret microphones with phantom power.
Specifications:
  • Frequency range: 22-22,000 Hz
  • Attenuation: 10 dB, 20 dB, 30 dB
  • Input impedance: 1.6 kΩ @ -10 dB
  • Output impedance: 660 Ω @ -10 dB
  • Connection: XLR jack, XLR plug
  • Dimensions: Ø 20.5 mm x 113 mm
  • Weight: 50 g

Price per unit   (Order No. mo-235490) EUR 21,51 excl. VAT: € 18.08 / $ 19.34


Adapter screw MAC-10

Adapter screw
 
  • Outside thread: 16 mm ( 5/8 ")
  • Inside thread, combined: 9 mm ( 3/8 ")
  • For microphone stands and goosenecks

 

Price per unit   (Order No. mo-233070) EUR 2,55 excl. VAT: € 2.14 / $ 2.29


Adapter screw MAC-30

Adapter screw
 
  • Inside thread: 16 mm ( 5/8 ")
  • Outside thread: 9 mm ( 3/8 ")

 

Price per unit   (Order No. mo-233080) EUR 2,97 excl. VAT: € 2.50 / $ 2.67


Adapter screw MAC-50

Adapter screw
 
  • Inside thread: 9 mm ( 3/8 ")
  • Outside thread: 6.3 mm (¼"), camera thread
  • Suitable for portable audio recorders, e.g. H-1 or H-2N

 

Price per unit   (Order No. mo-236350) EUR 2,91 excl. VAT: € 2.45 / $ 2.62


Adapter screw MAC-60

Adapter screw
 
  • Inside thread: 9 mm ( 3/8 ")
  • Outside thread: 12.7 mm (½")

 

Price per unit   (Order No. mo-236360) EUR 2,44 excl. VAT: € 2.05 / $ 2.19


Adapter screw MAC-70

Adapter screw
 
  • Inside thread: 9 mm ( 3/8 ")
  • Outside thread: M8 x 18 mm
  • Suitable for the speaker systems PAB-303/..., PAB-305/..., ESP-303/... and ESP-305/...

 

Price per unit   (Order No. mo-236390) EUR 2,61 excl. VAT: € 2.19 / $ 2.35


Dynamic microphone cartridge MD-110

Dynamic microphone cartridge, cardioid characteristic, also suitable as a replacement cartridge for DM-1100.
Specifications:
  • Frequency range: 50-16,000 Hz
  • Sensitivity: 2 mV/Pa/1 kHz
  • Output impedance: 600 Ω
  • S/N ratio: -
  • Coupling capacitor: -
  • Admiss. ambient temp.: 0-40 °C
  • Power supply:

Price per unit   (Order No. mo-233720) EUR 8,29 excl. VAT: € 6.97 / $ 7.45


Microphone holder, Ø 32-42 mm MH-152

Microphone holder, Ø 32-42 mm, black flexible plastic.
 
  • Especially suitable for wireless hand-held microphones which generally feature a bigger handle
  • 16 mm ( 5/8 ") standard thread

 

Price per unit   (Order No. mo-233540) EUR 7,59 excl. VAT: € 6.38 / $ 6.82


Clip MH-2/SK

Clip, for the connection cables of headband or earband microphones.
 
  • Beige lacquered metal version
  • For cables up to: Ø 1.5 mm

 

Price per unit   (Order No. mo-235770) EUR 11,18 excl. VAT: € 9.39 / $ 10.05


Microphone holder for standard microphones MH-36

Microphone holder for standard microphones
 
The special composition of plastic materials of this microphone holder guarantees a high flexibility at an optimum form stability. Suitable for microphones NX-7, NX-8. To be fixed alternatively at 9mm ( 3/8 ") or 16mm ( 5/8 ") stand threads.

 

Price per unit   (Order No. mo-234720) EUR 8,70 excl. VAT: € 7.31 / $ 7.82


Spring-loaded microphone clamp MH-99/SW

Spring-loaded microphone clamp, suitable for microphones of round and tapered design with a diameter of 19-32 mm. 16 mm ( 5/8 ") inside thread. When combined with adapter screw MAC-20, can be used for stands with 9 mm ( 3/8 ").

 

Price per unit   (Order No. mo-230970) EUR 6,96 excl. VAT: € 5.85 / $ 6.26


1-channel microphone preamplifier MPR-1

1-channel microphone preamplifier, with switchable phantom power.
 
  • 1 microphone input, XLR, bal. or 6.3 mm jack, bal.
  • Gain control: up to 50 dB max.
  • Clip LED
  • 30 V phantom power, can be switched on additionally
Specifications:
  • General Information:
  • Frequency range: 10-30,000 Hz
  • Input sensitivity: 3.5 mV (XLR, bal.) 16 mV (jack, bal.)
  • Input impedance: 10 kΩ
  • Output voltage: 1 V
  • Gain: 50 dB (with bal. connection) 44 dB (with unbal. connection)
  • S/N ratio: 58 dB
  • THD: 0.1 %
  • Admiss. ambient temp.: 0-40 °C
  • Power supply: via suppl. plug-in PSU
  • Dimensions (WxHxD): 113x92x40 mm
  • Weight: 345 g
  • Inputs: 1 x XLR 1 x 6.3 mm jack
  • Outputs: 1 x XLR 1 x 6.3 mm jack
  • Power supply:

Price per unit   (Order No. mo-212010) EUR 77,43 excl. VAT: € 65.07 / $ 69.62


Nylon bag for microphones MT-30

Nylon bag for microphones, with soft inner lining and solid zip fastener. For storing and transporting microphones. Dimensions: 22x14 cm

 

Price per unit   (Order No. mo-233310) EUR 11,77 excl. VAT: € 9.89 / $ 10.58


Neckband NM-43

Neckband
 
The NM-43 is the ideal addition to the CM-501. In combination with the lightweight and easy-to-adjust neckband (lightweight plastic version), the CM-501 lavalier microphone is positioned near the mouth. A type of headband microphone is thus created which features are based on this type of microphone, e.g. more freedom of head movements without serious change of the signal level. Supplied without microphone!

 

Price per unit   (Order No. mo-235070) EUR 8,37 excl. VAT: € 7.03 / $ 7.53


Phantom power supply adapter/mixer, battery-operated PS-500

Phantom power supply adapter/mixer, battery-operated
 
This high-quality power supply adapter supplies power to two microphones with 4-pole mini XLR plug (e.g. CX...W series, headband microphones and lavalier microphones of the CX/CM series) and thus can also be operated at mixers, home recorders or similar units without integrated +48 V phantom power. Additionally, it is possible to mix the two microphones via separate volume controls or to balance level differences. A 3-pole XLR connection serves as the output at which the output level can be switched between mic and line. The power is supplied by a 9V battery.
Specifications:
  • Power supply: 9 V battery
  • Connections: IN: 2 x 4-pole mini XLR OUT: 1 x XLR, bal.
  • Weight: 350 g

Price per unit   (Order No. mo-235080) EUR 77,95 excl. VAT: € 65.50 / $ 70.09


Microphone windshield WS-10

Microphone windshield, black foam.
 
  • For microphones with Ø 7-9 mm
  • Dimensions: Ø 14 mm x 15 mm
  • Suitable e.g. for ECM-300L

 

Price per unit   (Order No. mo-232560) EUR 3,36 excl. VAT: € 2.82 / $ 3.02


Microphone windshield WS-100/SW

Microphone windshield, black (SW) foam.
 
  • For microphones with Ø 6-8 mm
  • Dimensions: Ø 18 mm x 32 mm
  • Suitable e.g. for the HSE-100 series

 

Price per unit   (Order No. mo-235390) EUR 7,32 excl. VAT: € 6.15 / $ 6.58


Microphone windshields, 4 pcs. WS-150/SW

Microphone windshields, 4 pcs. beige (SK) or black (SW) foam.
 
  • For microphones with Ø 4-6 mm
  • Dimensions: Ø 11 mm x 12 mm
  • Suitable e.g. for ECM-500L/SK, ECM-501L/SK, HSE-60/SK, HSE-150/..., HSE-152/...

 

Price for 4 pcs   (Order No. mo-234320) EUR 8,70 excl. VAT: € 7.31 / $ 7.82


Microphone windshield WS-200/SK

Microphone windshield, beige (SK) or black (SW) foam.
 
  • For microphones with Ø 2-4 mm
  • Dimensions: Ø 7 mm x 15 mm
  • Suitable e.g. for the HSE-200 series

 

Price per unit   (Order No. mo-235400) EUR 7,32 excl. VAT: € 6.15 / $ 6.58


Microphone windshield WS-3

Microphone windshield, black foam.
 
  • For microphones with Ø 40-50 mm
  • Suitable e.g. for DM-2500 and microphones of the same design

 

Price per unit   (Order No. mo-231250) EUR 5,84 excl. VAT: € 4.91 / $ 5.25


Microphone windshield WS-30

Microphone windshield, black foam.
 
  • For microphones with Ø 11-15 mm
  • Dimensions: Ø 30 mm x 51 mm
  • Suitable e.g. for ECM-200, PAM-10

 

Price per unit   (Order No. mo-232580) EUR 3,36 excl. VAT: € 2.82 / $ 3.02


Microphone windshield WS-300/SK

Microphone windshield, beige (SK) or black (SW) foam.
 
  • For microphones with Ø 4-6 mm
  • Dimensions: Ø 17 mm x 29 mm
  • Suitable e.g. for the HSE-300 series

 

Price per unit   (Order No. mo-235420) EUR 7,32 excl. VAT: € 6.15 / $ 6.58


Microphone windshield WS-40

Microphone windshield, black foam.
 
  • For microphones with Ø 21-26 mm
  • Dimensions: Ø 39 mm x 55 mm
  • Suitable e.g. for DMG-600

 

Price per unit   (Order No. mo-232590) EUR 4,05 excl. VAT: € 3.40 / $ 3.64


Set of microphone windshields WS-5

Set of microphone windshields, foam, 5 colours (blue, yellow, green, red, black).
 
  • For microphones with Ø 40-50 mm
  • Suitable e.g. for DM-2500 and microphones of the same design

 

Price for 5 pcs   (Order No. mo-231260) EUR 19,72 excl. VAT: € 16.57 / $ 17.73


Microphone windshield WS-50

Microphone windshield, black foam.
 
  • Long version
  • For microphones with Ø 21-26 mm
  • Dimensions: Ø 42 mm x 65 mm
  • Suitable e.g. for ECM-100, ECM-600ST

 

Price per unit   (Order No. mo-232600) EUR 3,86 excl. VAT: € 3.24 / $ 3.47


Microphone windshield WS-60

Microphone windshield, black foam.
 
  • For microphones with Ø 40-50 mm
  • Dimensions: Ø 60 mm x 70 mm
  • Suitable e.g. for DM-2500 and microphones of the same design

 

Price per unit   (Order No. mo-232610) EUR 5,88 excl. VAT: € 4.94 / $ 5.29


Microphone windshield WS-950

Microphone windshield, black foam.
 
  • For microphones with Ø 21-26 mm
  • Dimensions: Ø 40 mm x 145 mm
  • Suitable e.g. for ECM-950

 

Price per unit   (Order No. mo-233760) EUR 11,63 excl. VAT: € 9.77 / $ 10.46


Multifrequency pocket transmitter TXA-800HSE

Multifrequency pocket transmitter, with UHF PLL technology. Matching the portable amplifier systems of the TXA-1000 and TXA-800 series.
 
  • 1 headband microphone (omnidir. char.), 1 tie clip microphone (cardioid char.)
  • 16 selectable UHF frequencies (863.1-864.9 MHz)
  • Metal housing
  • Microphone connection via 3-pole mini XLR jack
  • Audio line input via 3.5 mm stereo jack
  • Sensitivity to be adjusted in 3 steps
  • Mute function
  • Backlit LCD for indicating channel/frequency and battery status
  • Transmitting power: 10 mW (EIRP)
  • Power supply via 2 x 1.5 V battery AA size (not supplied)
  • Belt clip
Licence-free in the EU.
 
tastenwelt 02/2008
 
"The use of the headset is interesting for keyboard players."
Specifications:
  • Carrier frequency: 863.1-864.9 MHz
  • Audio frequency range: 70-16,000 Hz
  • Frequency stability: ±0.005 %
  • Operating time:
  • Dimensions: 65x95x30 mm
  • Weight: 110 g

Price per unit   (Order No. mo-172250) EUR 305,60 excl. VAT: € 256.81 / $ 274.78


Portable amplifier system TXA-15USB

Portable amplifier system, with integrated Bluetooth receiver and USB/SD card player.
 
  • Operation via mains connection or built-in lead gel battery 12 V/7.2 Ah (operating time: up to 6 hours), integrated automatic battery charging
  • For mobile applications, e.g. at sales events, lectures
  • Bluetooth receiver for the wireless connection of portable audio players
  • Adjustable USB/SD card player with connection for external storage media
  • 2-way speaker system
  • 1 adjustable balanced microphone input via XLR, 1 adjustable microphone input via 6.3 mm mono jack, 1 adjustable CD/Tape input via RCA
  • Adjustable master output with 3-way equalizer
  • Link connection (6.3 mm jack) for combining several TXA-15USB systems
  • Cabinet in flight case design, with folding handles
  • Due to the integrated extractable telescopic handle and 2 castors, the amplifier system can easily be pulled like a trolley
  • Stand sleeve
Specifications:
  • Output power: 20 WMAX/15 WRMS
  • Frequency range: 70-20,000 Hz
  • Carrier frequency: -
  • Operating range: -
  • Mic inputs: 6 mV
  • Line inputs: 600 mV
  • Link: 380 mV
  • Equalizer, bass: ±15 dB/100 Hz
  • Equalizer, midrange: ±15 dB/2.5 kHz
  • Equalizer, treble: ±15 dB/10 kHz
  • Power supply: 230 V /50 Hz/60 VA, rech. battery: 12 V/7.2 Ah
  • Admiss. ambient temp.: 0-40 °C
  • Dimensions: 410x470x310 mm
  • Weight: 17.2 kg

Price per unit   (Order No. mo-173150) EUR 432,70 excl. VAT: € 363.61 / $ 389.07


Rechargeable lead battery, 12 V TXA-815ACCU

Rechargeable lead battery, 12 V, universal rech. battery, also suitable as a replacement for TXA-110 and the TXA-800 series.
 
  • Capacity: 12 V/2.9 Ah
  • Maintenance-free, hermetically sealed
  • Dimensions: 79x107x56 mm
  • Weight: 1.2 kg

 

Price per unit   (Order No. mo-172930) EUR 34,19 excl. VAT: € 28.73 / $ 30.74


Portable MP3 FM amplifier system with wireless microphone WA-35

Portable MP3 FM amplifier system with wireless microphone
 
A powerful and most versatile unit for mobile applications in any weather condition! This compact and ultra-light class D power unit features a power capability of 25 W in battery operation (integrated 14.8 V rechargeable LiPo battery) and 35 W with a PSU. The WA-35 is ideally suited for outdoor applications due to a plashproof housing, stainless steel screws, impregnated full range speaker with dual cone and push-on silicone cover for the control unit. Further impressive features combined in a compact size:
 
  • MP3 reproduction via USB interface and SD card slot
  • FM radio with 20 station presets
  • Wireless 16-channel microphone system in the licence-free range 863-865 MHz (1 x 1.5 V battery, AA size)
  • Sound adjustment
  • Connection facility for a cable-connected microphone
  • Alarm siren: 2-tone and wailing sound
  • LED lamp with continuous light, automatic SOS light and flashing light
  • Charging status indication
  • Deep discharge protection
  • 9 mm ( 3/8 ") stand sleeve
  • Integrated recessed carrying handle
  • Robust carrying strap with integrated microphone bag ...
... and all that at an overall weight of 1.75 kg only!
 

 

Price per unit   (Order No. mo-172940) EUR 645,01 excl. VAT: € 542.03 / $ 579.97


Extension cable, 10 m D7P-10

Extension cable, 10 m, 7-pole DIN plug to 7-pole DIN jack.

 

Price per unit   (Order No. mo-173370) EUR 52,74 excl. VAT: € 44.32 / $ 47.42


Extension cable, 20 m D7P-20

Extension cable, 20 m, 7-pole DIN plug to 7-pole DIN jack.

 

Price per unit   (Order No. mo-173380) EUR 80,37 excl. VAT: € 67.54 / $ 72.27


Protective bag TXA-1000BAG

Protective bag, suitable for portable amplifier systems TXA-1000, TXA-1000CD and TXA-1002CD.
 
  • Robust synthetic fibre material, black
  • Sound-transparent front of meshed fabric
  • The bag can stay on during operation!
  • Opening for transport handle and trolley handle
  • 2 lateral pockets, each with hook and loop fastener
Supplied without unit.
 

 

Price per unit   (Order No. mo-172820) EUR 59,15 excl. VAT: € 49.71 / $ 53.19


Protective bag TXA-800BAG

Protective bag, suitable for portable amplifier systems TXA-800, TXA-800CD and TXA-802CD.
 
  • Robust synthetic fibre material, black
  • Sound-transparent front of meshed fabric
  • The bag can stay on during operation!
  • Opening for transport handle
  • 2 lateral pockets, each with hook and loop fastener
Supplied without unit.
 

 

Price per unit   (Order No. mo-172340) - not available


XLR function tester, 48 V CTG-1NOISE

XLR function tester, 48 V, with integrated pink noise generator.
 
  • For an easy and fast functional test of balanced microphone cables or of microphone inputs on stage
  • Visual fault indication via LEDFlashing twice: pin 2 of XLR cable is defective
  • Flashing three times: pin 3 of XLR cable is defective
  • LED is off: pin 1 or phantom power is defective
  • LED is lighting up permanently: faultless cable, noise generator
  • 3-pole NEUTRIK XLR plug
  • Power supply via phantom power: 9-48 V
  • Output amplitude: 100 mVpp
  • Dimensions: Ø 19 mm x 74 mm
  • Weight: 32 g

 
SOUNDCHECK 05/2013
 
"Useful tools for practical applications. The CTG testers (CTG-1NOISE & CTG-1SINE) are beneficial for stagehands who frequently have to search for the reason why there is no incoming signal."
 
+ Extra compact size
 
+ Reliable operation
 
+ Visual and acoustic indication
 
tools4music 03/2012
 
"The optogate phantom power line tester and the pink noise generator are ideally suited for applications on stage and in front of it. Anyone insisting on useful tools will love it. Totally recommendable. With both test candidates, a line check is far quicker and equally reliable. The visual and acoustic indications ensure a quick and reliable operation on stage - an absolute advantage."

 

Price per unit   (Order No. mo-292050) EUR 42,08 excl. VAT: € 35.36 / $ 37.84