Duero   wall speaker as in K+T 6/2018

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 88 dB
  • size (HxWxD): 205 x 1200 x 100 mm
  • frequency range (-8dB): 40 - 28000 Hz
  • crossover frequency(s): 220, 3000 Hz
  • speaker type: closed box

Duero is a three way wall-mounted speaker which has been optimized in frequency response for wall mounting (which increases the bass).

Duero is a closed-cabinet loudspeaker with drivers of Audaphon and Wavecor.

The kit is delivered with the following drivers:
- a Audaphon AMT 2i air motion transformer (ribbon-tweeter)
- a Wavecor WF120BD09 mids driver
- two Wavecor WF182BD10 woofers

The loudspeaker has been developed by Dennis Frank and Daniel Gattig.

The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a band pass consisting of a 2nd order high pass filter (12 dB per octave slope) and a2nd order low-pass filter (12 dB per octave slope) for the mids-woofer.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 400 Hz and doesn't exceed 1,5% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • Audaphon AMT-2i
  • Wavecor Mid/Woofer WF120BD09 glass fiber, die cast, 4 Ohm
  • 2x Wavecor Mid/Woofer WF182BD10 glass fiber, die cast, 8 Ohm
  • 0,5x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Female banana jacks, red and black
  • 2m Speaker cable 2x1.5 mm2 black/red
  • 2x Pan screws 3.5x17 black, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 3.3 μF / 400 Vdc
  • Audaphon MKP CAP Superior 6.8 μF / 400 Vdc
  • Audaphon MKT CAP 3.3 μF / 160 Vdc
  • Audaphon MKT CAP 8.2 μF / 160 Vdc
  • Audaphon MKT CAP 10 μF / 160 Vdc
  • 3x Audaphon MKT CAP 47 μF / 160 Vdc
  • electrolytic capacitor, etched, 100 μF/100 Vdc
  • electrolytic capacitor, etched, 150 μF/63 Vdc
  • electrolytic capacitor, etched, 470 μF/63 Vdc
  • electrolytic capacitor, etched, 680 μF/63 Vdc
  • Mundorf air core coil L140, 0.33 mH/0.15 Ohm
  • 0.7 mm air core coil, 0.18 mH/0.36 Ohm
  • 0.7 mm air core coil, 0.068 mH
  • Mundorf bs140 core coil 6.8mH/0.3Ohm
  • Mundorf H core coil H100, 3.3 mH/0.27 0hm
  • Mundorf H core coil H100, 4.7 mH/0.34 0hm
  • ceramic resistor 3.3 Ohm/20 Watt
  • 4x ceramic resistor 10 Ohm/20 Watt
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)
  • Metal-oxide resistor, 10W 10 Ohm (brown-black-black)

Kit without cabinet, price per speaker   EUR 1089,00 excl. VAT: € 915.13 / $ 979.18

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the tweeter are of type polypropylen (MKP) Clarity-Cap ESA 250.

Kit with high-end-crossover without cabinet, price per speaker   EUR 1126,00 excl. VAT: € 946.22 / $ 1012.45

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,80 excl. VAT: € 9.92 / $ 10.61
We recommend one board per kit (2 boards per speaker pair)


Home   Klang+Ton Overview