Thor Evo 04

Thor Evo 04 is a new highlight by Intertechnik, improving on the standard Thor kit (no longer available) by adding outstanding accessories.

This floorstanding speaker with excellent acoustic properties was developed by Dr. Joseph D'Appolito. Abundant knowledge and a great deal of experience are combined in this high-end loudspeaker. Both, the W 18 E001 mid / bass driver and the T 25 CF002 tweeter proved their capability in many auditions and reviews. The pair of W 18 impress with their flat frequency response and powerful bass.

The tapering transmission-line duct provides a clean and impressive bass. The T 25 CF002 tweeter shows an absolutely precise attack without any resonance. Only the best components are used for hardware and electronics.

 

Technical Data:

  • Dimensions without base (height x width x depth): 1060 x 229 x 343 mm
  • Power handling (continuous): 200  Watt
  • SPL: 89 dB (1W/1m)
  • Impedance: 4 Ohm

The kit contains:

  • Seas Excel, 25mm tweeter T25CF002 (E0011-06)
  • 2x Seas Excel, 18cm woofer W18 E001
  • ClarityCap PWA capacitor 2.2 uF / 400 Vdc
  • ClarityCap PWA capacitor 47 uF / 400 Vdc
  • ClarityCap ESA capacitor 5.6 uF / 630 Vdc
  • ClarityCap ESA capacitor 15 uF / 630 Vdc
  • Mundorf Hepta Coil II60, 0.15 mH/0.08 Ohm
  • Mundorf Hepta Coil II60, 0.22 mH/0.11 Ohm
  • Mundorf Hepta Coil II60, 0.27 mH/0.13 Ohm
  • Mundorf Hepta Coil II60, 1,0 mH/0.27 Ohm
  • MOX10 resistor 0.68 Ohm/10Watt (blue-grey-silver)
  • MOX10 resistor 2.2 Ohm/10Watt (red-red-gold)
  • MOX10 resistor 3.9 Ohm/10Watt (orange-white-gold)
  • MOX10 resistor 4.7 Ohm/10Watt (yellow-purple-gold)
  • PE sealing tape, 5x2 mm, 7.5 m
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • Bi-wiring Terminal T122 Au with brass, gold plated
  • 3x Inakustik Premium LS Silver speaker cable 2x 2,5 mm2, sliver plated
  • Pan screws 3.5x17 black, 4 pieces
  • Pan screws 4x20 black, 16 pieces
  • description and building instruction

Order No. str-thor-evo04, price per unit (without cabinet)   EUR 1085,00 excl. VAT: € 911.76 / $ 1030.29

Impedance correction for connecting a valve amp

If you wish to use a valve amp we recommend the following impedance correction:

- ClarityCap PWA capacitor 2.2 uF / 160 Vdc
- ClarityCap PWA capacitor 47 uF / 160 Vdc
- Mundorf Hepta Coil II60, 0.22 mH/0.11 Ohm
- Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)
- Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)

Price for impedance correction kit per speaker
Price per unit EUR 36,05 excl. VAT: € 30.29 / $ 34.23

Home   Seas Overview