Hypex DS-Series Plate Amps for active Subwoofer


DS-Series Plate Amp DS1.2

Enlarge The DS 1.2 is a state-of-the-art Class D amplifier module for active subwoofer use. Accurate rendition of the low bass range is a substantial component of a high-quality music reproduction. For an impressive bass rendition large loudspeakers are unfortunately inevitable. If you prefer small loudspeakers for optical reasons, you can use the DS1.2 to extend your bass rendition. The crossover frequency is adjustable steplessly between 50Hz and 150Hz. Due to this large range of control a problem-free connection is possible to different subwoofer and other loudspeaker systems. Additionally this active system has a low bass rise. An active 4th order subsonic filter with Butterworth characteristic protects the loudspeaker against mechanical overloading, since the ultralow portion of the fed signal would cause extreme diaphragm deflections.

General features:

  • High efficiency Class D design
  • Active subwoofer amplifier

Key electrical data

  • Continuous output power (8 Ohm): 75 Watts (+0, -0.5dB)
  • Continuous output power (4 Ohm): 120 Watts (+0, -0.5dB)
  • Subsonic-filter: 20Hz / -3dB, 24dB/Octave
  • Crossover frequency subwoofer: 50Hz - 150Hz, 18dB/Octave
  • Bassboost: 25Hz
  • Bossboost level: 2dB
  • Damping factor: 500
  • Protection: Output shortcut
  • Crossover filtering: Linkwitz-Riley, 12dB/Octave
  • Input impedance RCA: 10kOhm
  • Only suitable for 230Vac

Key mechanical data

  • Dimensions: 170mm x 190mm x 60mm(W x H x D)
  • Weight: 2Kg

Manual

Price per unit   (Order No hy-DS1-2) - not available
 


DS-Series Plate Amp DS2.0

Enlarge The DS 2.0 is a state-of-the-art Class D amplifier module for active subwoofer use. Accurate rendition of the low bass range is a substantial component of a high-quality music reproduction. For an impressive bass rendition large loudspeakers are unfortunately inevitable. If you prefer small loudspeakers for optical reasons, you can use the DS2.0 to extend your bass rendition. The crossover frequency is adjustable steplessly between 30Hz and 120Hz. Due to this large range of control a problem-free connection is possible to different subwoofer and other loudspeaker systems. Additionally this active system has a low bass rise. An active 4th order subsonic filter with Butterworth characteristic protects the loudspeaker against mechanical overloading, since the ultralow portion of the fed signal would cause extreme diaphragm deflections.

General features:

  • High efficiency Class D design
  • Active subwoofer amplifier

Key electrical data

  • Continuous output power (8 Ohm): 100 Watts (+0, -0.5dB)
  • Continuous output power (4 Ohm): 175 Watts (+0, -0.5dB)
  • Subsonic-filter: 12Hz / -3dB, 24dB/Octave
  • Crossover frequency subwoofer: 30Hz - 120Hz, 18dB/Octave
  • Bassboost: 20Hz - 50Hz
  • Bossboost level: 0dB - +6dB
  • Damping factor: 500
  • Protection: Output shortcut
  • Crossover filtering: Linkwitz-Riley, 18dB/Octave
  • Input impedance RCA: 10kOhm
  • 230/115Vac switchable

Key mechanical data

  • Dimensions: 190mm x 220mm x 60mm(W x H x D)
  • Weight: 2.5Kg

Manual

Price per unit   (Order No hy-DS2-0) - not available
 


DS-Series Plate Amp DS4.0

Enlarge The DS 4.0 is a state-of-the-art Class D amplifier module for active subwoofer use. Accurate rendition of the low bass range is a substantial component of a high-quality music reproduction. For an impressive bass rendition large loudspeakers are unfortunately inevitable. If you prefer small loudspeakers for optical reasons, you can use the DS4.0 to extend your bass rendition. The crossover frequency is adjustable steplessly between 30Hz and 120Hz. Due to this large range of control a problem-free connection is possible to different subwoofer and other loudspeaker systems. Additionally this active system has a low bass rise. An active 4th order subsonic filter with Butterworth characteristic protects the loudspeaker against mechanical overloading, since the ultralow portion of the fed signal would cause extreme diaphragm deflections.

General features:

  • High efficiency Class D design
  • Active subwoofer amplifier

Key electrical data

  • Continuous output power (8 Ohm): 210 Watts (+0, -0.5dB)
  • Continuous output power (4 Ohm): 400 Watts (+0, -0.5dB)
  • Subsonic-filter: 12Hz / -3dB, 24dB/Octave
  • Phase: 0 - 180, 180 - 360
  • Crossover frequency subwoofer: 30Hz - 120Hz, 18dB/Octave
  • Bassboost: 20Hz - 50Hz
  • Bassboost level: 0dB - +6dB
  • Damping factor: 1000
  • Protection: Output shortcut / DC-error
  • Crossover filtering: Linkwitz-Riley, 18dB/Octave
  • Input impedance RCA: 10kOhm
  • Input impedance high level: 1kOhm
  • 230/115Vac switchable

Key mechanical data

  • Dimensions: 267mm x 267mm x 70mm (W x H x D)
  • Weight: 4.1Kg

Manual

Price per unit   (Order No hy-DS4-0) - not available
 


DS-Series Plate Amp DS8.0

Enlarge The DS 8.0 is a state-of-the-art Class D amplifier module for active subwoofer use. Accurate rendition of the low bass range is a substantial component of a high-quality music reproduction. For an impressive bass rendition large loudspeakers are unfortunately inevitable. If you prefer small loudspeakers for optical reasons, you can use the DS8.0 to extend your bass rendition. The crossover frequency is adjustable steplessly between 50Hz and 150Hz. Due to this large range of control a problem-free connection is possible to different subwoofer and other loudspeaker systems. Additionally this active system has a low bass rise. An active 4th order subsonic filter with Butterworth characteristic protects the loudspeaker against mechanical overloading, since the ultralow portion of the fed signal would cause extreme diaphragm deflections.

General features:

  • High efficiency Class D design
  • Active subwoofer amplifier

Key electrical data

  • Continuous output power (8 Ohm): 530 Watts (+0, -0.5dB)
  • Continuous output power (4 Ohm): 800 Watts (+0, -0.5dB)
  • Subsonic-filter: 12Hz / -3dB, 24dB/Octave
  • Phase: 0 - 180, 180 - 360
  • Crossover frequency subwoofer: 50Hz - 150Hz, 18dB/Octave
  • Bassboost: 20Hz - 50Hz
  • Bassboost level: 0dB - +6dB
  • Damping factor: 1000
  • Protection: Output shortcut / DC-error
  • Crossover filtering: Linkwitz-Riley, 24dB/Octave
  • Input impedance RCA: 10kOhm
  • Input impedance XLR: 10kOhm
  • 230/115Vac switchable

Key mechanical data

  • Dimensions: 267mm x 267mm x 70mm (W x H x D)
  • Weight: 5.75Kg

Manual

Price per unit   (Order No hy-DS8-0) - not available