Harwood-Cinema Satellit   Home Cinema as in Hobby Hifi 1/2015

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): 84 dB
  • size (HxWxD): 295 x 180 x 240 mm
  • frequency range (-8dB): 60 - 28000 Hz
  • crossover frequency(s): 2700 Hz
  • speaker type: closed box

Our kit consists of

  • Harwood air motion transformer AM 22
  • Harwood mids woofer TM 130/25F1
  • PE sealing tape, 5x2 mm
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • Speaker cable 2x2.5 mm2, transparent
  • Pan screws 3.5x17 black, cross recess, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a piece of wood
  • Audaphon MKP CAP Superior 4.7 uF / 400 Vdc
  • Audaphon MKP CAP Superior 10 uF / 400 Vdc
  • Mundorf, electrolytic capacitor, unetched, 15uF / 70 Vdc
  • 0.5 mm air core coil, 2.2 mH/2.50 0hm
  • 0.7 mm air core coil, 0.47 mH/0.50 Ohm
  • 1.4 mm air core coil, 1.5 mH/0.38 Ohm
  • Metal-oxide resistor, 5W 3.9 Ohm (orange-white-gold)
  • Metal-oxide resistor, 5W 12 Ohm (brown-red-black)
  • Metal-oxide resistor, 10W 5.6 Ohm (green-blue-gold)

Kit without cabinet, price per speaker   EUR 275,00 excl. VAT: € 231.09 / $ 261.13

Kit with high-end crossover

  • Mundorf MCAP Supreme 4.70 uF / 600 V
  • Mundorf MCAP EVO Oil 10 uF / 450 V
  • Audaphon MKP CAP Superior 15 uF / 400 Vdc
  • Mundorf copper foil coil CFC14-0.47mH/0.15Ohm
  • Mundorf air core coil L50, 2.2 mH/2.50 0hm
  • Mundorf baked varnish air core coil BL140, 1.5 mH/0.38 Ohm
  • Metal-oxide resistor, 5W 3.9 Ohm (orange-white-gold)
  • Metal-oxide resistor, 5W 12 Ohm (brown-red-black)
  • Metal-oxide resistor, 10W 5.6 Ohm (green-blue-gold)

Kit with high-end-crossover without cabinet, price per speaker   EUR 340,00 excl. VAT: € 285.71 / $ 322.86

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 10,00 excl. VAT: € 8.40 / $ 9.50

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit:   EUR 5,10 excl. VAT: € 4.29 / $ 4.84
We recommend one board per kit (two boards for a speaker pair)

Satellit with two woofers

Apart from the centre speaker, there is also the satellite with two woofers:

Our kit consists of

  • Harwood air motion transformer AM 22
  • 2x Harwood mid-woofer TM 130/25F1
  • PE sealing tape, 5x2 mm
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • Speaker cable 2x2.5 mm2, transparent
  • Pan screws 3.5x17 black, cross recess, 12 pieces
  • Plan for DIY kit

the crossover components (right side),
to be mounted on a piece of wood
  • Audaphon MKT CAP 33 uF / 160 Vdc
  • Audaphon MKP CAP Superior 4.7 uF / 400 Vdc
  • Audaphon MKP CAP Superior 22 uF / 400 Vdc
  • 0.5 mm air core coil, 1 mH/1.47 0hm
  • 0.7 mm air core coil, 0.47 mH/0.50 Ohm
  • 1.4 mm air core coil, 0.68 mH/0.26 Ohm
  • Metal-oxide resistor, 5W 5.6 Ohm (green-blue-gold)
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)

Kit without cabinet, price per speaker   EUR 358,00 excl. VAT: € 300.84 / $ 339.95

Kit with high-end crossover

  • Mundorf MCAP EVO Oil 4.7 uF / 450 V
  • Mundorf MCAP EVO Oil 22 uF / 450 V
  • ClarityCap PWA capacitor 33 uF / 160 Vdc
  • Mundorf air core coil L50, 1 mH/1.47 0hm
  • Mundorf baked varnish air core coil BL140, 0.68 mH/0.23 Ohm
  • Mundorf copper foil coil CFC14-0.47mH/0.15Ohm
  • Metal-oxide resistor, 5W 5.6 Ohm (green-blue-gold)
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)
  • 1,5m Inakustik loudspeaker cable Premium LS Silver (silver plated)

Kit with high-end-crossover without cabinet, price per speaker   EUR 398,00 excl. VAT: € 334.45 / $ 377.93

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 7,00 excl. VAT: € 5.88 / $ 6.65

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit:   EUR 5,10 excl. VAT: € 4.29 / $ 4.84
We recommend one board per kit (two boards for a speaker pair)


Home   Hobby HiFi Overview