Visaton VOX 253 MTI

The 3 way bass reflex, floorstanding VOX 253 MIT is an original Visaton kit, consisting of side mounted, powerful bass driver and a front mounted tweeter surrounded by two titanium midrange drivers.
Visaton VOX 253 MTI, Bild aus Zeitschrift K+T 2/2003

Die VOX 253 MTI shows the following characteristics:

  • enormous bass power due to the side mounted TIW 250 XS
  • beautiful, slim design (height x width x depth): 115 x 23.5 x 40 cm
  • exemplary accessories and description by Visaton

Technical data:

  • frequency range: 28-30 000 Hz (-8dB)
  • power handling (continuous/programme): 150 / 300 Watt
  • crossover frequencies: 200 Hz and 4000 Hz
  • average SPL: 83 dB (1W/1m)
  • average SPL: 86 dB (2.83V/1m)
  • impedance: 4 Ohm

The Visaton VOX 253 MTI kit contains:

  • 1 x MHT 12 tweeter
  • 2 x TI 100 midrange drivers, 8 Ohm
  • 1 x TIW 250 XS bass driver, 8 Ohm
  • 1 x terminal
  • 4 x bags damping material
  • 1 x crossover VOX 253 MTI, assembled
  • 20 x assorted screws
  • 1 x cover for the bass driver mounted on the side
  • 2 x cable for internal wiring
  • description and building instruction

Order No. V-5987, price per pair (without cabinet) EUR 2602,90 excl. VAT: € 2187.31 / $ 2362.30

Visaton VOX 253 MTI with DIY high-end crossover

By popular request of our customers we also offer a version with high-end crossover. The crossover, to be built on two universal PCB's, consists of:
- 2 x universal PCB's 205x140 mm for wiring up components

for MHT 12 magnetostat:
- Mundorf MKP Supreme 3.3 μF / 800 V
- baked varnish air core coil 0.47 mH / 0.41 Ohm
- Mundorf MKP capacitor 6.8 μF / 400 V
- MOX10 1.5 Ohm/10Watt (brown-green-gold)
- MOX10 8.2 Ohm/10Watt (grey-red-gold)

for TI 100 midrange drivers:
- MKP capacitor 100uF / 400V, improving transparency.
- 2 x MOX10 4.7 Ohm (yellow-purple-gold) in parallel, instead of single 2.2 Ohm, since
  the 2.2 Ohm would get extremely hot already at 10 Watt power draw.
- Mundorf H-core coil 3.3 mH (a 2 mm air core coil would be even better )
- MKP capacitor 68uF / 400V, improving transparency.
- baked varnish air core coil 0.82 mH / 0.54 Ohm
- Mundorf MKP capacitor 0.47 μF / 630 V instead of 2 x ELCO special,
  resulting in a dramatic sound improvement.
- Mundorf MKP capacitor 6.8 μF / 400 V
- baked varnish air core coil 0.33 mH / 0.26 Ohm
- 0.5 mm ferrite core coil 10 mH / 3.48 Ohm (for resonance suppression)
- Mundorf, 150 μF/63 V, ELCO etched (for resonance suppression)

for the bass driver, where quality is less critical:
- Mundorf H-core coil with 4.7 mH
- ELCO, non-etched 100uF/ 35Volt
- ELCO, non-etched 33uF / 50Volt
- ELCO, non-etched 47uF / 50Volt
- MOX10 resistor, 6.8 Ohm (blue-grey-gold)
- 0.6 mm ferrite core coil 22 mH / 4.26 Ohm
- Mundorf, 330 μF/63 V, ELCO etched
- MOX10 4.7 Ohm (yellow-purple-gold)
  Please note: 4.7 Ohm instead of 3.3 Ohm should be used, since the coil has less resistance.

Price of high-end crossover kit: EUR 299,00 excl. VAT: € 251.26 / $ 271.36

Upon request we also supply the standard kit with high-end crossover. Price for one loudspeaker: EUR 1407,00 excl. VAT: € 1182.35 / $ 1276.94

Home   Visaton Overview