Monacor SPH-30X/8SW

With the help of the chassis overview page you find more than 5000 loudspeaker chassis.

=> more loudspeakers of this brand.
 


open a bigger photo

Monacor SPH-30X/8SW       order no. mo-104190       EUR 53,00 excl. VAT: € 44.54 / $ 51.22
full range driver with kevlar cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 20/50 W
  • frequency range = 200-17000 Hz
  • resonance frequency fs = 105 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 4,48 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 30 cm2
  • effective mechanical mass incl. air load mms = 2,65 g
  • equivalent volume of compliance Vas = 1,3 l
  • total Q factor Qts = 0,46 (Qms=8,59, Qes=0,49)
  • voice coil diameter = 21 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 73 mm
  • overall diameter d = 80,5x80,5 mm
  • mounting depth (not countersunk) t = 42 mm
  • mass m = 0,15 kg
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted