Tweeter   Mids   Woofer   Subwoofer   Ersatzteile   no longer sold  

Morel

The Israelien Morel loudspeaker drivers are top components regarding quality of reproduction. They are usually found in finished loudspeakers of the upper price segment.

What began as a dream in 1975 - to create the perfect loudspeaker - has turned into a life's work for Morel's founder, Meir Mordechai. Inspired by his love of music, Meir's quest to create the ultimate speaker has resulted in a company known worldwide for its dedication to providing superb sound quality. Along the way, Morel has built up an enviable reputation for technological innovation and design excellence.

Morel's products are made with exceptional care. They are all assembled by hand and extensively tested - undergoing seven different quality tests - to ensure they meet the highest standards.

To our kits with Morel loudspeakers.
 


 

Tweeter


open a bigger photo

open a bigger photo

CAT 298       order no. mor-cat298       EUR 49,00
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 1800-20000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,5 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 27 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAT 308       order no. mor-cat308       EUR 69,50
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1600-25000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAT 328-104       order no. mor-cat328-104       EUR 87,00
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1000-20000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAT 328-110       order no. mor-cat328-110       EUR 95,00
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1000-20000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

open a bigger photo

open a bigger photo

ET 338       order no. mor-et338       EUR 162,99
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1800-20000 Hz
  • resonance frequency fs = 700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 76 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

ET 338-104       order no. mor-et338-104       EUR 155,00
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1800-20000 Hz
  • resonance frequency fs = 700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 76 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAT 378       order no. mor-cat378       EUR 62,90
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 55 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAT 408       order no. mor-cat408       EUR 73,90
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 120 W
  • frequency range = 1600-25000 Hz
  • resonance frequency fs = 780 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,46 g
  • total Q factor Qts = 0,52 (Qms=0,87, Qes=1,3)
  • voice coil diameter = 28 mm
  • mounting diameter d = 44 mm
  • overall diameter d = 72 mm
  • mounting depth (not countersunk) t = 57 mm
PDF data sheet

open a bigger photo

open a bigger photo

ET 448       order no. mor-et448       EUR 109,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 120 W
  • frequency range = 2200-22000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 2,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 44 mm
  • overall diameter d = 72 mm
  • mounting depth (not countersunk) t = 55 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 728 Gray       order no. mor-st728-silver       EUR 196,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 120 W
  • frequency range = 1500-22000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • total Q factor Qts = 0,36 (Qms=0,8, Qes=0,65)
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 0,95 mm
  • mounting diameter d = 53 mm
  • overall diameter d = 72 mm
  • mounting depth (not countersunk) t = 50 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 728 Black       order no. mor-st728       EUR 196,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 120 W
  • frequency range = 1500-22000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • total Q factor Qts = 0,36 (Qms=0,8, Qes=0,65)
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 53 mm
  • overall diameter d = 72 mm
  • mounting depth (not countersunk) t = 50 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 1048 Gray       order no. mor-st1048-silver       EUR 218,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1400-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 37 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 1048 Black       order no. mor-st1048       EUR 218,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1400-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 37 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 1108 Gray       order no. mor-st1108-silver       EUR 225,01
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1400-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 37 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 1108 Black       order no. mor-st1108       EUR 225,01
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1400-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 37 mm
PDF data sheet

open a bigger photo

open a bigger photo

ST 1308 Gray       order no. mor-st1308       EUR 249,00
28 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1400-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,44 g
  • voice coil diameter = 28 mm
  • mounting diameter d = 104 mm
  • overall diameter d = 130 mm
  • mounting depth (not countersunk) t = 35 mm
PDF data sheet

 

Mids


open a bigger photo

open a bigger photo

MDM 55       order no. mor-mdm55       EUR 78,90
7 cm midrange driver with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 500-6000 Hz
  • resonance frequency fs = 380 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 5,2 N/A
  • voice coil inductance L = 0,19 mH
  • effective piston radiating area Sd = 28 cm2
  • effective mechanical mass incl. air load mms = 2,8 g
  • total Q factor Qts = 0,69 (Qms=1,13, Qes=1,75)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 87x87 mm
  • mounting depth (not countersunk) t = 84 mm
PDF data sheet

open a bigger photo

open a bigger photo

EM 1308       order no. mor-em1308       EUR 148,00
11 cm midrange driver with highend cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 500-5000 Hz
  • resonance frequency fs = 380 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 5,2 N/A
  • voice coil inductance L = 0,19 mH
  • effective piston radiating area Sd = 28 cm2
  • effective mechanical mass incl. air load mms = 3 g
  • total Q factor Qts = 0,08 (Qms=0,09, Qes=1,01)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 76 mm
  • overall diameter d = 130 mm
  • mounting depth (not countersunk) t = 75 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 130/82 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,2 L volume bass reflex cabinet
with HP35 reflex tube, 12 cm long.
from 64/52 Hz (-3dB/-8dB).

EM 428       order no. mor-em428       EUR 132,99
11 cm midrange driver with highend cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-5000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,36 mH
  • effective piston radiating area Sd = 57 cm2
  • effective mechanical mass incl. air load mms = 6,55 g
  • equivalent volume of compliance Vas = 3,5 l
  • total Q factor Qts = 0,41 (Qms=3,03, Qes=0,48)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 94 mm
  • overall diameter d = 118,5 mm
  • mounting depth (not countersunk) t = 51 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,4 L volume
from 94/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 46/37 Hz (-3dB/-8dB).

SCM 634       order no. mor-scm634       EUR 366,83
15 cm midrange driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-18000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 4,9 N/A
  • voice coil inductance L = 0,12 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 14,5 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,41 (Qms=1,32, Qes=0,59)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 7,8 L volume
from 76/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
32 L volume bass reflex cabinet
with HP70 reflex tube, 16 cm long.
from 35/30 Hz (-3dB/-8dB).

TSCM 634       order no. mor-tscm634       EUR 399,00
15 cm midrange driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-18000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 5,09 N/A
  • voice coil inductance L = 0,11 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 15,3 g
  • equivalent volume of compliance Vas = 13,3 l
  • total Q factor Qts = 0,49 (Qms=4,25, Qes=0,56)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

 

Woofer


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 152/96 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,3 L volume bass reflex cabinet
with HP35 reflex tube, 8 cm long.
from 76/61 Hz (-3dB/-8dB).

CAW 428       order no. mor-caw428       EUR 102,95
11 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 74 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 57 cm2
  • effective mechanical mass incl. air load mms = 4,55 g
  • equivalent volume of compliance Vas = 4,5 l
  • total Q factor Qts = 0,38 (Qms=2,33, Qes=0,46)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 94 mm
  • overall diameter d = 118,5 mm
  • mounting depth (not countersunk) t = 45 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,93 L volume
from 142/90 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3,1 L volume bass reflex cabinet
with HP35 reflex tube, 14 cm long.
from 74/58 Hz (-3dB/-8dB).

EW 428       order no. mor-ew428       EUR 152,00
11 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 62 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,44 mH
  • effective piston radiating area Sd = 57 cm2
  • effective mechanical mass incl. air load mms = 6,16 g
  • equivalent volume of compliance Vas = 4,7 l
  • total Q factor Qts = 0,35 (Qms=2,36, Qes=0,41)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 94 mm
  • overall diameter d = 118,5 mm
  • mounting depth (not countersunk) t = 51 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 115/73 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3,6 L volume bass reflex cabinet
with HP35 reflex tube, 19 cm long.
from 61/48 Hz (-3dB/-8dB).

EW 536       order no. mor-ew536       EUR 161,00
13 cm bass driver with high quality cone. The magnet system is based on Neodymium technology. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 32-4000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 4,2 Ohm
  • force factor BL = 7,5 N/A
  • voice coil inductance L = 0,26 mH
  • effective piston radiating area Sd = 88 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 6 l
  • total Q factor Qts = 0,34 (Qms=1,7, Qes=0,43)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 121 mm
  • overall diameter d = 143 mm
  • mounting depth (not countersunk) t = 60 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,6 L volume
from 116/73 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 13 cm long.
from 63/49 Hz (-3dB/-8dB).

ECW 536       order no. mor-ecw536       EUR 199,00
13 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 4,5 Ohm
  • force factor BL = 6,83 N/A
  • voice coil inductance L = 0,28 mH
  • effective piston radiating area Sd = 88 cm2
  • effective mechanical mass incl. air load mms = 14,8 g
  • equivalent volume of compliance Vas = 11 l
  • total Q factor Qts = 0,31 (Qms=1,55, Qes=0,39)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 121 mm
  • overall diameter d = 143 mm
  • mounting depth (not countersunk) t = 60 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 2 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,1 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 52/42 Hz (-3dB/-8dB).

CAW 538       order no. mor-caw538       EUR 115,90
13 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 35-3500 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,9 N/A
  • voice coil inductance L = 0,47 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 8,2 l
  • total Q factor Qts = 0,38 (Qms=1,83, Qes=0,48)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 121 mm
  • overall diameter d = 143 mm
  • mounting depth (not countersunk) t = 60 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 38/31 Hz (-3dB/-8dB).

CAW 634       order no. mor-caw634       EUR 124,90
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-5000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 0,46 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 13,7 l
  • total Q factor Qts = 0,42 (Qms=2,1, Qes=0,53)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,3 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 6,3 L volume
from 75/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
25 L volume bass reflex cabinet
with HP70 reflex tube, 23 cm long.
from 36/30 Hz (-3dB/-8dB).

CAW 638       order no. mor-caw638       EUR 119,90
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-5000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 7,3 N/A
  • voice coil inductance L = 0,63 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16 g
  • equivalent volume of compliance Vas = 15,7 l
  • total Q factor Qts = 0,46 (Qms=2,2, Qes=0,58)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 111/70 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,6 L volume bass reflex cabinet
with HP50 reflex tube, 19 cm long.
from 60/47 Hz (-3dB/-8dB).

EW 638       order no. mor-ew638       EUR 174,00
15 cm bass driver with high quality cone. The magnet system is based on Neodymium technology. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-4000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 7,5 N/A
  • voice coil inductance L = 0,27 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16 g
  • equivalent volume of compliance Vas = 16,92 l
  • total Q factor Qts = 0,31 (Qms=1,63, Qes=0,38)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
  • mass m = kg
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,4 L volume
from 110/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,7 L volume bass reflex cabinet
with HP50 reflex tube, 23 cm long.
from 62/47 Hz (-3dB/-8dB).

SCW 636       order no. mor-scw636       EUR 327,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-15000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 4,5 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,29 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16 g
  • equivalent volume of compliance Vas = 18,5 l
  • total Q factor Qts = 0,29 (Qms=1,76, Qes=0,35)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,4 L volume
from 107/68 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,9 L volume bass reflex cabinet
with HP50 reflex tube, 23 cm long.
from 60/46 Hz (-3dB/-8dB).

ECW 638       order no. mor-ecw638       - not available
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 7,45 N/A
  • voice coil inductance L = 0,26 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16 g
  • equivalent volume of compliance Vas = 19 l
  • total Q factor Qts = 0,29 (Qms=1,42, Qes=0,36)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 89/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,6 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 46/36 Hz (-3dB/-8dB).

TICW 634ND       order no. mor-ticw634nd       EUR 232,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,7 Ohm
  • force factor BL = 6,6 N/A
  • voice coil inductance L = 0,29 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 17,7 g
  • equivalent volume of compliance Vas = 17,3 l
  • total Q factor Qts = 0,34 (Qms=4,98, Qes=0,37)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 84/53 Hz (-3dB/-8dB)
 
recommended cabinet 2:
18 L volume bass reflex cabinet
with HP70 reflex tube, 26 cm long.
from 41/33 Hz (-3dB/-8dB).

TICW 638ND       order no. mor-ticw638nd       EUR 232,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-4000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 7,5 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16,8 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,43 (Qms=4,68, Qes=0,47)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 4 L volume
from 86/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,3 L volume bass reflex cabinet
with HP50 reflex tube, 16 cm long.
from 43/34 Hz (-3dB/-8dB).

TIW 634ND       order no. mor-tiw634nd       EUR 189,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 40,5 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,7 Ohm
  • force factor BL = 6,52 N/A
  • voice coil inductance L = 0,41 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 17,8 g
  • equivalent volume of compliance Vas = 16,5 l
  • total Q factor Qts = 0,36 (Qms=5,33, Qes=0,39)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 84/53 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 42/34 Hz (-3dB/-8dB).

TIW 638ND       order no. mor-tiw638nd       EUR 189,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 7,7 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 15,5 l
  • total Q factor Qts = 0,4 (Qms=4,7, Qes=0,44)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 5,8 L volume
from 78/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
22 L volume bass reflex cabinet
with HP70 reflex tube, 25 cm long.
from 39/31 Hz (-3dB/-8dB).

TIW 634FT       order no. mor-tiw634ft       EUR 139,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 0,45 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 15,7 g
  • equivalent volume of compliance Vas = 19,7 l
  • total Q factor Qts = 0,39 (Qms=4,3, Qes=0,43)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 6,2 L volume
from 77/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 24 cm long.
from 37/30 Hz (-3dB/-8dB).

TIW 638FT       order no. mor-tiw638ft       EUR 139,00
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 7,3 N/A
  • voice coil inductance L = 0,63 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 15,5 g
  • equivalent volume of compliance Vas = 19,7 l
  • total Q factor Qts = 0,42 (Qms=3,96, Qes=0,47)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,8 L volume
from 96/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,7 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 49/39 Hz (-3dB/-8dB).

TSCW 636       order no. mor-tscw636       EUR 379,00
15 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-6000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 4,5 Ohm
  • force factor BL = 7,9 N/A
  • voice coil inductance L = 0,26 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 19 g
  • equivalent volume of compliance Vas = 13,3 l
  • total Q factor Qts = 0,35 (Qms=3,8, Qes=0,39)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

open a bigger photo

open a bigger photo

CAW 938       order no. mor-caw938       EUR 139,00
21 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 20-3000 Hz
  • resonance frequency fs = 31 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 7,05 N/A
  • voice coil inductance L = 0,61 mH
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 29 g
  • equivalent volume of compliance Vas = 51 l
  • total Q factor Qts = 0,61 (Qms=2,59, Qes=0,8)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • mounting diameter d = 198 mm
  • overall diameter d = 222 mm
  • mounting depth (not countersunk) t = 71 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 56/36 Hz (-3dB/-8dB)
 
recommended cabinet 2:
35 L volume bass reflex cabinet
with HP70 reflex tube, 31 cm long.
from 28/22 Hz (-3dB/-8dB).

TICW 958FT       order no. mor-ticw958ft       EUR 449,00
21 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 500 W
  • frequency range = 30-2000 Hz
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 15 N/A
  • voice coil inductance L = 0,62 mH
  • effective piston radiating area Sd = 243 cm2
  • effective mechanical mass incl. air load mms = 77 g
  • equivalent volume of compliance Vas = 34 l
  • total Q factor Qts = 0,39 (Qms=4,4, Qes=0,43)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 10,5 mm
  • mounting diameter d = 200 mm
  • overall diameter d = 222 mm
  • mounting depth (not countersunk) t = 120 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 24 L volume
from 52/33 Hz (-3dB/-8dB)
 
recommended cabinet 2:
85 L volume bass reflex cabinet
with HP100 reflex tube, 32 cm long.
from 27/21 Hz (-3dB/-8dB).

TICW 1058FT       order no. mor-ticw1058ft       EUR 479,00
25 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 600 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 24 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 15,86 N/A
  • voice coil inductance L = 0,52 mH
  • effective piston radiating area Sd = 346 cm2
  • effective mechanical mass incl. air load mms = 106 g
  • equivalent volume of compliance Vas = 106 l
  • total Q factor Qts = 0,37 (Qms=4,95, Qes=0,4)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 10,5 mm
  • mounting diameter d = 241 mm
  • overall diameter d = 263 mm
  • mounting depth (not countersunk) t = 142 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 34 L volume
from 43/27 Hz (-3dB/-8dB)
 
recommended cabinet 2:
113 L volume bass reflex cabinet
with HP100 reflex tube, 35 cm long.
from 23/18 Hz (-3dB/-8dB).

TICW 1258FT       order no. mor-ticw1258ft       EUR 569,00
29 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 600 W
  • frequency range = 19-1000 Hz
  • resonance frequency fs = 19 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 15,25 N/A
  • voice coil inductance L = 0,62 mH
  • effective piston radiating area Sd = 437 cm2
  • effective mechanical mass incl. air load mms = 110 g
  • equivalent volume of compliance Vas = 170 l
  • total Q factor Qts = 0,35 (Qms=4,03, Qes=0,38)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 10,5 mm
  • mounting diameter d = 270 mm
  • overall diameter d = 305 mm
  • mounting depth (not countersunk) t = 143 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 7,8 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
26 L volume bass reflex cabinet
with HP70 reflex tube, 33 cm long.
from 33/26 Hz (-3dB/-8dB).

UW 958       order no. mor-uw958       EUR 375,00
21 cm bass driver with paper cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 500 W
  • frequency range = 10-2000 Hz
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 13 N/A
  • voice coil inductance L = 1,32 mH
  • effective piston radiating area Sd = 243 cm2
  • effective mechanical mass incl. air load mms = 65,5 g
  • equivalent volume of compliance Vas = 39,5 l
  • total Q factor Qts = 0,35 (Qms=1,61, Qes=0,45)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 11,5 mm
  • mounting diameter d = 200 mm
  • overall diameter d = 222 mm
  • mounting depth (not countersunk) t = 120 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 14,5 L volume
from 48/30 Hz (-3dB/-8dB)
 
recommended cabinet 2:
57 L volume bass reflex cabinet
with HP70 reflex tube, 26 cm long.
from 23/19 Hz (-3dB/-8dB).

UW 1058       order no. mor-uw1058       EUR 399,00
25 cm bass driver with paper cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 500 W
  • frequency range = 10-2000 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 15,3 N/A
  • voice coil inductance L = 1,33 mH
  • effective piston radiating area Sd = 346 cm2
  • effective mechanical mass incl. air load mms = 99,3 g
  • equivalent volume of compliance Vas = 40,8 l
  • total Q factor Qts = 0,43 (Qms=1,72, Qes=0,58)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 241 mm
  • overall diameter d = 263 mm
  • mounting depth (not countersunk) t = 142 mm
PDF data sheet

open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 46 L volume
from 39/25 Hz (-3dB/-8dB)
 
recommended cabinet 2:
180 L volume bass reflex cabinet
with 2x HP100 reflex tube, 49 cm long.
from 19/16 Hz (-3dB/-8dB).

UW 1258       order no. mor-uw1258       EUR 475,00
29 cm bass driver with paper cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 800 W
  • frequency range = 10-2000 Hz
  • resonance frequency fs = 21 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 13,67 N/A
  • voice coil inductance L = 1,33 mH
  • effective piston radiating area Sd = 437 cm2
  • effective mechanical mass incl. air load mms = 105,49 g
  • equivalent volume of compliance Vas = 138,38 l
  • total Q factor Qts = 0,43 (Qms=1,88, Qes=0,56)
  • voice coil diameter = 130 mm
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 270 mm
  • overall diameter d = 305 mm
  • mounting depth (not countersunk) t = 148 mm
PDF data sheet

R-29 Ersatzschwingspule für MDT 29, CAT 298       order no. mor-r29       EUR 14,99
.
  • impedance R = 8 Ohm

R-30 Ersatzschwingspule für MDT 30, CAT 308       order no. mor-r30       EUR 21,15
.
  • impedance R = 8 Ohm

R-32/33 Ersatzschwingspule für CAT 328, MDT 32/33, ET 338, Supreme 110/130, ST 1048/1108/1308       order no. mor-r33       EUR 21,00
.
  • impedance R = 8 Ohm

R-37 Ersatzschwingspule für MDT 27/37, CAT 378       order no. mor-r37       EUR 21,00
.
  • impedance R = 8 Ohm

R-ST 728 Ersatzschwingspule für ST 728       order no. mor-rst728       EUR 23,15
.
  • impedance R = 8 Ohm

DMS 29       order no. mor-dms29       - not available
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 1000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,5 g
  • voice coil diameter = 28 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 78 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 42 mm

recommended cabinet 1:
closed cabinet with 2,2 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,9 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

HU 531       order no. mor-hu531       - not available
9 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 180 W
  • frequency range = 40-5000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 5 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 12,2 g
  • equivalent volume of compliance Vas = 9,92 l
  • total Q factor Qts = 0,37 (Qms=1,84, Qes=0,46)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 58,3 mm
PDF data sheet

Supremo       order no. not-available       - not available
28 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 220 W
  • frequency range = 1600-22000 Hz
  • resonance frequency fs = 680 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 6 cm2
  • voice coil diameter = 28 mm
  • mounting diameter d = 50 mm
  • overall diameter d = 100 mm

MW 113       order no. not-available       - not available
7 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-6000 Hz
  • resonance frequency fs = 72 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 3,98 N/A
  • voice coil inductance L = 0,25 mH
  • effective piston radiating area Sd = 53 cm2
  • effective mechanical mass incl. air load mms = 5,54 g
  • equivalent volume of compliance Vas = 4,3 l
  • total Q factor Qts = 0,77 (Qms=3,13, Qes=1,03)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • overall diameter d = 118 mm
  • mounting depth (not countersunk) t = 58 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 119/75 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 12 cm long.
from 57/47 Hz (-3dB/-8dB).

MW 114S       order no. not-available       - not available
7 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 50-6500 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,57 N/A
  • voice coil inductance L = 0,36 mH
  • effective piston radiating area Sd = 53 cm2
  • effective mechanical mass incl. air load mms = 6,55 g
  • equivalent volume of compliance Vas = 3,5 l
  • total Q factor Qts = 0,44 (Qms=3, Qes=0,51)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • overall diameter d = 118 mm
  • mounting depth (not countersunk) t = 58 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 3 L volume
from 105/66 Hz (-3dB/-8dB)
 
recommended cabinet 2:
10,1 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 55/43 Hz (-3dB/-8dB).

H 5.1       order no. not-available       - not available
11 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 35-5500 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,93 N/A
  • voice coil inductance L = 0,43 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 8,6 g
  • equivalent volume of compliance Vas = 15,2 l
  • total Q factor Qts = 0,35 (Qms=2,43, Qes=0,41)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 62 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 2,8 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,1 L volume bass reflex cabinet
with HP50 reflex tube, 18 cm long.
from 55/43 Hz (-3dB/-8dB).

HU 521       order no. not-available       - not available
9 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 150 W
  • frequency range = 40-5000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 8 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 9,2 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0,34 (Qms=2,3, Qes=0,4)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 58,3 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 2 L volume
from 116/73 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,9 L volume bass reflex cabinet
with HP50 reflex tube, 19 cm long.
from 60/47 Hz (-3dB/-8dB).

MW 143       order no. not-available       - not available
9 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 35-5200 Hz
  • resonance frequency fs = 52 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 10,36 g
  • equivalent volume of compliance Vas = 9,5 l
  • total Q factor Qts = 0,36 (Qms=2,32, Qes=0,43)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 142 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 6,1 L volume
from 75/47 Hz (-3dB/-8dB)
 
recommended cabinet 2:
25 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 34/29 Hz (-3dB/-8dB).

MW 144       order no. not-available       - not available
9 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 35-5000 Hz
  • resonance frequency fs = 52 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,2 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 90 cm2
  • effective mechanical mass incl. air load mms = 13,68 g
  • equivalent volume of compliance Vas = 8 l
  • total Q factor Qts = 0,55 (Qms=2,44, Qes=0,71)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 142 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 3,9 L volume
from 101/64 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 53/41 Hz (-3dB/-8dB).

H 6.1       order no. not-available       - not available
15 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,76 N/A
  • voice coil inductance L = 0,43 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 11,78 g
  • equivalent volume of compliance Vas = 20 l
  • total Q factor Qts = 0,35 (Qms=2,2, Qes=0,42)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 136 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 61 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 6,5 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
23 L volume bass reflex cabinet
with HP70 reflex tube, 16 cm long.
from 46/37 Hz (-3dB/-8dB).

HU 621       order no. not-available       - not available
10 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 160 W
  • frequency range = 35-3000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 10 g
  • equivalent volume of compliance Vas = 27 l
  • total Q factor Qts = 0,38 (Qms=2,34, Qes=0,45)
  • voice coil diameter = 54 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 160,5 mm
  • mounting depth (not countersunk) t = 59,6 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 107/67 Hz (-3dB/-8dB)
 
recommended cabinet 2:
10,7 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 57/44 Hz (-3dB/-8dB).

HU 631       order no. not-available       - not available
10 cm bass driver with high quality cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 180 W
  • frequency range = 20-5000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • voice coil inductance L = 0,63 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 13,87 g
  • equivalent volume of compliance Vas = 19,5 l
  • total Q factor Qts = 0,33 (Qms=1,81, Qes=0,4)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 160,5 mm
  • mounting depth (not countersunk) t = 59,6 mm
PDF data sheet

MW 164       order no. not-available       - not available
10 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-2800 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 6,15 N/A
  • voice coil inductance L = 0,61 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 14,9 g
  • equivalent volume of compliance Vas = 11,4 l
  • total Q factor Qts = 0,68 (Qms=2,82, Qes=0,89)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 160,5 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 14,7 L volume
from 63/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
57 L volume bass reflex cabinet
with HP70 reflex tube, 12 cm long.
from 28/25 Hz (-3dB/-8dB).

MW 166       order no. not-available       - not available
10 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-5000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • force factor BL = 6,84 N/A
  • voice coil inductance L = 0,61 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 16,3 g
  • equivalent volume of compliance Vas = 15,6 l
  • total Q factor Qts = 0,58 (Qms=2,79, Qes=0,74)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 4,8 L volume
from 94/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
18 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 47/38 Hz (-3dB/-8dB).

MW 167       order no. not-available       - not available
10 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-4500 Hz
  • resonance frequency fs = 47 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • force factor BL = 7,8 N/A
  • voice coil inductance L = 0,77 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 12,6 g
  • equivalent volume of compliance Vas = 17,5 l
  • total Q factor Qts = 0,4 (Qms=2,28, Qes=0,48)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 15 L volume
from 67/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
52 L volume bass reflex cabinet
with HP100 reflex tube, 31 cm long.
from 34/27 Hz (-3dB/-8dB).

HU 9.1       order no. not-available       - not available
14 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 20-3300 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • force factor BL = 8,3 N/A
  • voice coil inductance L = 0,87 mH
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 23,5 g
  • equivalent volume of compliance Vas = 71 l
  • total Q factor Qts = 0,36 (Qms=1,71, Qes=0,46)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 220 mm
  • mounting depth (not countersunk) t = 69,4 mm
PDF data sheet

MW 265       order no. not-available       - not available
14 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-3600 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,58 mH
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 25,5 g
  • equivalent volume of compliance Vas = 61 l
  • total Q factor Qts = 0,62 (Qms=2,79, Qes=0,79)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 222 mm
  • mounting depth (not countersunk) t = 69 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 66 L volume
from 43/27 Hz (-3dB/-8dB)
 
recommended cabinet 2:
261 L volume bass reflex cabinet
with HP100 reflex tube, 11 cm long.
from 19/17 Hz (-3dB/-8dB).

MW 266       order no. not-available       - not available
14 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 22-2200 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 6,25 N/A
  • voice coil inductance L = 0,54 mH
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 24,9 g
  • equivalent volume of compliance Vas = 80 l
  • total Q factor Qts = 0,56 (Qms=2,45, Qes=0,73)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 220 mm
  • mounting depth (not countersunk) t = 69 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 81 L volume
from 44/28 Hz (-3dB/-8dB)
 
recommended cabinet 2:
333 L volume bass reflex cabinet
with HP100 reflex tube, 6 cm long.
from 20/17 Hz (-3dB/-8dB).

MW 1077       order no. not-available       - not available
17 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 200 W
  • frequency range = 15-4600 Hz
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • voice coil inductance L = 0,95 mH
  • effective piston radiating area Sd = 324 cm2
  • effective mechanical mass incl. air load mms = 33 g
  • equivalent volume of compliance Vas = 147 l
  • total Q factor Qts = 0,5 (Qms=2,62, Qes=0,62)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 263 mm
  • mounting depth (not countersunk) t = 80 mm
PDF data sheet

MDT 41       order no. not-available       - not available
.
  • power handling (continuous/programme) = 120 W
  • resonance frequency fs = 750 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)

recommended cabinet 1:
closed cabinet with 8,3 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
34 L volume bass reflex cabinet
with HP70 reflex tube, 14 cm long.
from 37/31 Hz (-3dB/-8dB).

MW 168       order no. not-available       - not available
10 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 30-5000 Hz
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 6,04 N/A
  • voice coil inductance L = 0,45 mH
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 13,27 g
  • equivalent volume of compliance Vas = 17 l
  • total Q factor Qts = 0,48 (Qms=2,29, Qes=0,61)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 65 mm
PDF data sheet

recommended cabinet 1:
closed cabinet with 20 L volume
from 57/36 Hz (-3dB/-8dB)
 
recommended cabinet 2:
75 L volume bass reflex cabinet
with HP100 reflex tube, 28 cm long.
from 28/23 Hz (-3dB/-8dB).

MW 267       order no. not-available       - not available
14 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 180 W
  • frequency range = 20-3000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 26,7 g
  • equivalent volume of compliance Vas = 62,5 l
  • total Q factor Qts = 0,42 (Qms=2,5, Qes=0,5)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 220 mm
  • mounting depth (not countersunk) t = 69 mm
PDF data sheet

MW 1075       order no. not-available       - not available
17 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 180 W
  • frequency range = 20-1600 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,63 mH
  • effective piston radiating area Sd = 324 cm2
  • effective mechanical mass incl. air load mms = 32,6 g
  • equivalent volume of compliance Vas = 123 l
  • total Q factor Qts = 0,62 (Qms=2,48, Qes=0,83)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,25 mm
  • overall diameter d = 263 mm
  • mounting depth (not countersunk) t = 80 mm
PDF data sheet
Tweeter   Mids   Woofer   Subwoofer   Ersatzteile   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2008 Iris Strassacker; All rights reserved. - errors and omissions excepted